Question about iRiver PMP-120 Digital Media Player

2 Answers

Boot failure i need to download the system file for my pmp- 120 but dont seem to find any website. my player has a firmware version 1.13. please help

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

1st go to Ihttp://www.shamrockman.net/ and dload the version you want to run. My PMP shows 1.23 but I couldn't find that version so I now run 1.24.. Save the dloads in a new folder on your computer.. There should be (7) items that dload to your computer.

*** I have found that just copying the files to your PMP Player will NOT work.***

I had to delete ALL (7) of the system files and folders.
1.) BMP folder
2.) etc folder
3.) system file
4.) (4) "Version-[0x..... " files..

So there were (7) items I had to delete. Once deleted go to the folder you saved the dloads to. I had to click and drag each item to the drive your PMP player is connected to. Once all (7) items have been placed on your PMP player disconnect it, turn off the power, wait a minute and turn it back on. These steps worked PERFECTLY for me. Please let me know in this forum if this helps..

Thanks..

Posted on Jan 10, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 556 Answers
Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dear sir i get a problem with Boot failure every i turn on my pmp-120. i need the solution, please help me!


the latest firmware is 2.04 download HERE and follow instructions. HERE is the download link for the english version of the users manual. I had to add the .zip extension to it to make it extract but to answer your question it does not look like it supports .m4a files. Use THIS to convert yor .m4a files to .mp32_bing.gif so you can play them, it's free to try

Apr 25, 2010 | iRiver PMP-120 Digital Media Player

2 Answers

My iriver got boot failure,


the latest firmware is 2.04 download HERE and follow instructions. HEREis the download link for the english version of the users manual. I hadto add the .zip extension to it to make it extract but to answer yourquestion it does not look like it supports .m4a files. Use THIS to convert yor .m4a files to .mp32_bing.gif so you can play them, it's free to try

Sep 13, 2009 | iRiver PMP-120 Digital Media Player

2 Answers

Won't boot up and not recognised when connected to PC


MANUAL FIRMWARE UPGRADE PROCEDURE:
During the upgrading of the firmware, if you turn off the power of M800, either by manually switching off the power or removal of the battery, the file system of M800 will be damaged, which will lead to booting failure problem. When this happens, you will not be able to turn on M800. Booting failure problem can be easily repaired by “manual firmware upgrade”. The procedures for manual firmware upgrade are as follows:

1. After firmware upgrade, only the blue LED under LCD is on, but LCD display is not turned on, please proceed manual firmware upgrade.
2. Remove the battery.
3. Put the battery back into the player again.
* Notice ! : Do not turn on the power.
4. Connect the player to your PC.
* Notice ! : Do not turn on the power.
5. While pressing the volume down button, power on the player.
6. Now PC should recognize M800 as one of its hard disks.
7. Download the latest firmware file into the root folder of the player.
8. Disconnect the player from your PC.
9. The blue light LED under the LCD display will flicker.
10. Wait for about one minute, blue LED is off. Turn on the player.
The manual firmware upgrade is now completed.



Jan 04, 2009 | Audio Players & Recorders

1 Answer

Iriver pmp-120


Boot failure or just nothing?

Boot failure would be the hard disk.
Just nothing would indicate that the system board is dead.

You don't mention using the mains power adaptor.

Mar 15, 2008 | iRiver PMP-120 Digital Media Player

1 Answer

Boot failure


1st go to Ihttp://www.shamrockman.net/ and dload the version you want to run. My PMP shows 1.23 but I couldn't find that version so I now run 1.24.. Save the dloads in a new folder on your computer.. There should be (7) items that dload to your computer.

*** I have found that just copying the files to your PMP Player will NOT work.***

I had to delete ALL (7) of the system files and folders.
1.) BMP folder
2.) etc folder
3.) system file
4.) (4) "Version-[0x..... " files..

So there were (7) items I had to delete. Once deleted go to the folder you saved the dloads to. I had to click and drag each item to the drive your PMP player is connected to. Once all (7) items have been placed on your PMP player disconnect it, turn off the power, wait a minute and turn it back on. These steps worked PERFECTLY for me. Please let me know in this forum if this helps..

Thanks..

Jan 08, 2008 | iRiver PMP-120 Digital Media Player

1 Answer

Iriver pmp-140 digi.media player prob help plz


Here is the fix: Boot Failure

Sometimes just downloading and following the procedure in Boot Failure does not work, because the system files cannot be overwritten, in this case follow the additional instructions here to delete manually the system files.

Oct 04, 2007 | iRiver PMP-140 Digital Media Player

2 Answers

I River Idiot !


Dead Hard Drive. Thats all i can tell you. Did you hit a huge pothole or drop it today? With the way firmware is today you'll juest need to send him in. Sorry to say it, but that's the solution! thanks! Let me know of any followup needed

Jul 27, 2007 | iRiver PMP-120 Digital Media Player

8 Answers

Iriver PMP-140 boot failure message


when i turn on my Iriver PMP-140 it comes up with a message reading
Boot Failure
System file has an error.
To solve the problem, connect the device to computor.
(refer to 'trouble shooting' on the manuel)
Filmware Ver. 1.24
I dont have a manual though.

May 13, 2007 | iRiver PMP-140 Digital Media Player

2 Answers

Boot failure


Dead Hard Drive. Thats all i can tell you. Did you hit a huge pothole or drop it today? With the way firmware is today you'll juest need to send him in. Sorry to say it, but that's the solution! thanks! Let me know of any followup needed

Apr 28, 2007 | iRiver PMP-120 Digital Media Player

Not finding what you are looking for?
iRiver PMP-120 Digital Media Player Logo

Related Topics:

477 people viewed this question

Ask a Question

Usually answered in minutes!

Top iRiver Audio Players & Recorders Experts

Steven Wander
Steven Wander

Level 3 Expert

593 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Mohamed Ismail
Mohamed Ismail

Level 3 Expert

462 Answers

Are you an iRiver Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...