I lost my instalation CD and i dont hav the instalation program for my Mini Wireless LAN USB 2.0 adapter 802 11b/g model XN-3134G .. how can i get or how can i install my wireless

Very good USB WIFI adapter, this Mini 150M USB WiFi Wireless LAN 802.11n/g/b Adapter with Antenna is so cute and portable!!

https://encrypted.google.com/url?sa=t&rct=j&q=xterasys%20xn-2523g%20802.11g%2Fb%20wireless%20driver&source=web&cd=7&sqi=2&ved=0CEoQFjAG&url=http%3A%2F%2Fdownload.cnet.com%2F802-11b-g-Atheros-Wireless-Lan-Driver-7-1-0-90-zip%2F3000-2112_4-162108.html&ei=UbttTpnVF6iQiAegvOHIBA&usg=AFQjCNEp7HaMjcsHmSn0yE8-j-ZTm4Cf4Q

Click here You can download driver and utility from above link. It's in zip format extract it then install. Let me know if you need further assistance. Thanks for using FixYa.

INSTALLING THE WIRELESS LAN DEVICE DRIVER
Please follow the procedures below for installing the Mini PCI Adapter driver:
Installing Wireless LAN driver for Windows XP
1. Click the Start button and then click Run. The Run dialog box appears.
2. Click Browse button and specify the directory as "E:\Drivers\Winxp\Wireless LAN\setup.exe"
3. Click "OK" to implement the setup program to install this driver.
4. Click "Next" twice to continue the installation.
INSTALLING THE LAN DEVICE DRIVER
• Wireless LAN Access When LED turns on indicates that the wireless LAN module is activated. When LED lights off, it indicates that the function is disabled
MUST BE A SOFTWARE ACTIVATED SWITCH

what you can do is if you got another computer with internet connectivity then go on to the usb adapter make site and there sould be a section for you to download the driver software

See: http://www.fixya.com/support/xterasys

You're not the first person to have this problem.

i think i fond your driver
http://download729.mediafire.com/bs51yh5ddbyg/fyc53g0tjhj/Blitzz.zip

if the link dont work try this one
http://www.mediafire.com/file/fyc53g0tjhj/Blitzz.zip

if it dont work tell me i will do something else
good lock

Are you using Windows XP on your primary PC? If yes, you dont need to install the wireless LAN monitor of the usb adapter because Windows XP has a built-in wireless monitor. Start with a clean slate by uninstalling it from Add/Remove Programs. Next, to install it properly, just plug the wireless adapter into your computer, and when Windows XP finds it, it will either look for the cd to get its driver or it will install it automatically (verify this by right clicking on My Computer >> Properties >> Hardware >> Device Manager. You should see the adapter under Network Adapters) and it should say something like "it's working properly). Once installed, go to Control Panel >> Network Connections. Right click Wireless Network Connection, click View Available Wireless Networks. Connect to your wireless router from here.

Hi there,
You will find you LAN (BroadcomLAN driver 4.28) or (Broadcom Giga LAN driver 8.27.1) storage (Intel chip set driver) and Wireless (Broadcomm 802.11b+g wireless) or (Intel 802,11b+g Wireless LAN driver 9.0.1.9)  ->drivers from here:

Plz let me know how you go


regards /Teis

I used this one:

Introduction
============
This document describes the procedure to install driver for the 2Wire Wireless USB Adapter under Microsoft Windows, and to run a wireless configuration program to configure your 2Wire Wireless USB Adapter to work with a 2Wire HomePortal or OfficePortal wireless gateway. These drivers work under Microsoft Windows 98SE, ME, 2000, and XP.

STEP 1 - Driver Installation
============================
1. Make sure your 2Wire Wireless USB Adapter has not been connected to your computer USB port.
2. Double-click on the file to run WinZip Self-Extractor. The driver installation files will be placed in your hard disk in the C:\TWWUSB_TEMP directory
3. Connect your 2Wire Wireless USB Adapter to an available USB port in your computer. Windows Found New Hardware Wizard will startup.
4. Select the option to search for driver in specific location. Specify C:\TWWGUSB_TEMP as the location of driver.
5. Follow on-screen instruction to finish driver installation.

STEP 2 - Wireless Configuration
===============================
1. Run the program WirelessCfg.exe in the directory C:\TWWGUSB_TEMP. You can do so by clicking on the Windows Start button and select Run. The Windows Start button is typically at the lower left corner of the screen. Type in C:\TWWGUSB_TEMP\WirelessCfg.exe to launch the program.
2. Follow on-screen instruction to configure your wireless setting. Enter the serial number and encryption key as they are printed on the bottom of your 2Wire wireless gateway.