I need instructions on how to load pics to my Optimus 07A08 digital frame.

http://static.fixya.com/Manuals/O/Optimus/201E586.pdf

https://www.amazon.com/Optimus-16-665-640x220-Widescreen-Digital/dp/B005020S4Q

Manual and picture.

You must be sure the frame will read the file format of the camera. If not, then load the pictures on your computer, use a file conversion program and use a second SD card to load the pictures on then put it in the frame.

Hi bon_kahlua_r,

It means that your Digital Photo Frame might not have support for the file formats of some pictures that you saved. Most Digital Photo Frame supports *.jpg formats. Please check the manual of your Digital Photo Frame as well as the files that your saved. Right-click on the pictures that are not supported then Click Properties. You should be able to see the file format of the picture then compare it to the Frame's manual if it's supported.

Thanks

this is not a problem!;this always appears when you connect the USB cable to the PC and the frame.What you do next is ignore the frame and concentrate on the pc: go to the file where you have your pics stored, RIGHT click on the folder or pics you want to load and hit SEND TO ,in this case send to the Pandigital drive connection .Play with this with a couple of photos,check your frame to make sure they loaded and if ok then load all you want!

How big our your jpg pic files?
reduce them to 800x600: sh hold about 200+ pics.
also delete the pics that were pre-loaded
fred

You can use an SD card. Put card in pc, put pics on the pics file on card, then put card in the frame.

Try using a diferent picture program.

look the usb port from the frame is for connecting a Stick / flash drive. not for connecting to pc.

You can change out your pictures by having an XD or SD Memory cards if you have a card reader for your computer plug in the memory card put the photos on to it that u want on ur pic frame and plug it in to the xd/sd card slot on the left hand side of the photo frame and there u go. If you want ur pics off the internal memory u can transfer them from the frame to the card via the options button or menu button that is.

I had the same problem. I use kodak easyshare software and load my pics on to that. Then put all the pics you want in the picture tray. Have your frame plugged into the computer with your usb cord. Then go up to File menu and drop down to "copy to". On my computer it is Folder "E" which is the drive the frame is connected to. Then pick from the Resize drop down menu " best for picture frame', then click copy. You will see the program loading all the pics to E drive. When done, unplug usb cord and you will see it loading on your pic frame. As easy as this is to do, I found it frustrating as well, but when it works, it is easy. Hope this helps