I have a Digistar EZ2000 has error saying indicator need service

Hi,

Please first place an excercise weight on the scale . The scale might be attempting to calibrate it's sensors before being able to properly weight unknown items. After 30 seconds, it might ask you for some kind of input to specify the weight of the test item. Otherwise, you'll need to factory reset your scale.

Thank you.

I got an ERR2 message and now the scale doesn't work. What should I do?

The following reset procedure is used when the scale shows an err2, err, 0.0, inaccurate weight, or some other unusual error.

1. Remove the battery from the scale.
2. Sit the scale on a hard surface floor.
3. Step up onto the scale, stand still for about 5 seconds and step off the scale.
4. Re-install your battery.
5. Place the scale back on a hard surface floor.
6. With one foot only, place just enough weight on the scale for the display shows zero's or dashes. Once you see zeros or dashes remove your foot.
7. Wait for the scale to turn off again.
8. Step up onto the scale for a weight.

If the reset is successful, you should receive a weight right away. If you continue to receive one of the error messages above please call the manufacturer's Customer Service

You say, that: "I have two Weight Watcher scales, model WW11D."

Can I have three guesses where you purchased them???
Do they come with any sort of warranty?

Their weight is inaccurate as compared to the official scales when you weigh yourself at the Weight Watchers meeting.

Are the people running the Weight Watchers meetings absolutely and totally unable to provide an answer regarding these scales?

The manual for the SL1200 (same machine but silver, acccording to an online reviewer) says:

"An auxiliary weight may be necessary between the
cartridge and headshell, mostly in a DJ application.
Many new cartridges and new turntables come with
these weights. If you cannot achieve the recommended
tracking force, then this weight is what will be needed."

Sorry I can't give you the exact weight. My service literature has everything but dimensions and weights. But Amazon.com says the shipping weight is 170 pounds.

From the Taylor Site http://www.taylorusa.com/faq-scales

Here are the basic ERR messages and their meanings:

• Error 0: Initialization
• Error 1: Instability (scale is on an uneven surface ex: carpet)
• Error 2: Unit may have been jarred or unit was overloaded (customer went over the maximum weight capacity)
• Error 3: Contact error (Feet were not wet for Body fat reading, feet aren’t big enough to reach sensors)
• Error 4: Body fat is out of range
• Error 5: Water is out of range

I got an ERR2 message and now the scale doesn’t work. What should I do? The following reset procedure is used when the scale shows an err2, err, 0.0, inaccurate weight, or some other unusual error.

1. Remove the battery from the scale.
2. Sit the scale on a hard surface floor.
3. Step up onto the scale, stand still for about 5 seconds and step off the scale.
4. Re-install your battery.
5. Place the scale back on a hard surface floor.
6. With one foot only, place just enough weight on the scale for the display shows zero’s or dashes. Once you see zeros or dashes remove your foot.
7. Wait for the scale to turn off again.
8. Step up onto the scale for a weight.

If the reset is successful, you should receive a weight right away. If you continue to receive one of the error messages above please call our Customer Service department or contact us via email. You can also try the reset procedure a 2nd time. Sometimes the reset procedure will work the second time.

It is not OUT2, but rather OUE2, which means your chefmate needs to re calibrate. To do that you will need the following:

a 2000 grams weight or 4.4 lbs, I used a 3lbs protein jug unopenened and a 600 grams glutamine bottle unopened.

Ok so turn your scale off then:

1) press the ON button and leave it press while simultaneously pressing once the TARE button (though it may need more than one or maybe leaving it press for a few secs thought try just hitting it once first), release the TARE and you should see a CAL on the screen (top left), release the ON and it will read:

2) the number 00000 on the first line will appear, click TARE

-this calibrates no weight first-

3) then it will read you another weight mine read 2000 grams, put that weight on top of the scale (NOTE every scale uses a different weight to calibrate i am giving you mine) once you put it there hit tare and it should read PASS

4) Remove the weight and it should read "0", mine read first 1 grm so i had to re do it again until i got 0.

5) You can try weighting different unopened things that you know the weight of, but if not just turn it OFF then back ON and it should read "0"

Congratulations your scale is now calibrated and ready to use again!!!!


NOTES: i have the electric scale if the on tare button does not works for you it may need a different combination to calibrate.

Finding replacement parts for store bought scales can be a fun experience to say the least. I would purchase a product from Seca or Health o Meter instead. Their parts and service centers are right here in the states and are genuine about their product accuracy and costomer service.

Included with the BFMG20 is 150lbs stackable weight plates.

Storing and Recalling Weights
1. Your scale can store and recall up to 5 weights. If your scale has one button,
weights can be stored for one user. If your scale has two buttons (User and
Save/Recall buttons), weights can be stored for multiple users.
2. Tap center of scale platform with foot and wait until "00.0" appears.
3. Stand on the platform without shifting or moving until weight is displayed.
4. For single user scale: When weight reading appears on screen, step off the
scale, press Save/Recall button and hold for about 2 seconds to save the
reading.
For multiple user scale: When weight reading appears on screen, step off the
scale, and press User button to select a user number. Then press Save/Recall
button for 2 seconds to save the reading.
5. Weight reading blinks twice, then becomes stable. A small number (1-5)
appears in the upper right hand corner of your display, indicating which of the
5 weights is displayed. (Once you have 5 weights in memory the current weight
always saves as "1" and the oldest reading is eliminated.)
6. Weight reading is saved. Press Save/Recall button to review the last 5 weights or
let the scale shut down automatically. (Note: until you have 5 weights stored in
memory, the display will show the number and "–" for each weight for which
no data point has been stored yet; i.e. "3 –", "4 –", "5 –" if only 2 weights
have been saved.)

Hope this helps!!