i have a samsung syncmaster 591s CRT monitor. it works fine at 800x600 resolution @ 85Hz. but at 1024x768 (60 Hz) the screen flickers too much. There are no more options to increase the Refresh rate from 60 Hz. The monitor uses the ''Intel 82945G Express Chipset Family'' adapter-type. Any solutions to tackle this problem?
Comments:
Oct 29, 2009
- it is a Plug n Play device. moreover i have also installed the Display drivers that came on the motherboard's driver CD.
lg2234s monitor goes of blinking...cant turn monitor off (blue light remains off) then monitor turns...
(More)
lg2234s monitor goes of blinking...cant turn monitor off (blue light remains off) then monitor turns on ..screen pic returns but is totally green, the OSD becomes garbled, if set to return to default then everything becomes normal, using osd buttons also blanks out screen and blinking of screen occurs again..osd is all garbled even if pc is switched off.
There is blank lines apperaring on the screen. The most recent one was preceded by a 'popping"...
(More)
There is blank lines apperaring on the screen. The most recent one was preceded by a 'popping" sound before it appeared.