Hotpoint wm79 1200 spin. When motor is running there is a clicking noise coming from motor and it...
(More)
Hotpoint wm79 1200 spin. When motor is running there is a clicking noise coming from motor and it wont run at full speed, i have checked the brushes there are lots left, any ideas
Miele w404 brushes wearing down quickly Miele w404. Original brushes lasted 8 years. replaced them...
(More)
Miele w404 brushes wearing down quickly Miele w404. Original brushes lasted 8 years. replaced them and they lasted 1 year. I checked commutator was smooth and could not feel anything obvious. Machine does tick if drum moved one direction. One brush wears much quicker than the other. Could this be the commutator or something else? dod i need a new motor and if so how much? where to et one? how hard to fit (compared to changing the brushes) thanks for reading this. derrick Apologies if this has double posted. I was not sure if i put it in right area first time.
I have a W404Plus machine. Its about 5 years old in a domestic property. Load the machine and it...
(More)
I have a W404Plus machine. Its about 5 years old in a domestic property. Load the machine and it will wash clothes until the rinse cycle where it gets stuck and will not rinse nor go to the spin cycle. I have homecare 400 with British Gas for appliances and they have been around TWICE and said the machine is fine and was due to the drain pipe being slightly blocked with some fabric. They said after cleaning it would be fine. Worked for a day and then back to square one. Can you help??