I have a GE coffee maker and grinder model no. 169103...Use only 20 times went to turn it on nothing happened.

THE POWER SWITCH MAYBE DAMAGED

I just called Jura support and they talked me through this SIMPLE solution and it worked right away. Change the grind setting *while the grinder is a spinning*. If you don’t do it while its spinning nothing will happen.

Don’t hesitate to call Jura - their support team is very good.

800 220 5701

These are notorious for this problem. It is cause by the coffee grinder portion wearing out and sticking. After a while the grinder will fuse to the basket. It is cause by the spinning of the grinder and wear to the grinder shaft or coffee grounds getting into the shaft and causing wear. Either wan the only fix is a new basket.Send Cuisinart an email to complain and they may give you a new one free. I went through 3 before I gave up on the grind and brew model.

I'm on my second grinder of this model.......... in the past 2 months. The first stopped working so I just took it back and replaced it. The second time it quit working I removed the cup with the grinded coffee and noticed smoke wafting up from the unit. Both times it quick working I was grinding 12 cups of beans (12 cups of brewed coffee, not 12 cups of actual beans). The unit shouldn't have a setting to grind that much coffee if it burns the motor out, which is what happened.

Howdy. I'm going to take one for the team on this one and tell you what I found out from Bosch. They say nothing is ever to be put in the coffee grinder area except coffee. They understand that while it is a popular home grinder tip to clean with rice, that does not include integrated coffee systems like the Benvenuto. Sadly, they went on to tell me that they had no suggestions at all for removing the residue from the workings of the machine. I had thought that eventually, over time, it might rinse away. am very sorry to deliver this news and hope someone somewhere has a better answer for you.
Best regards,
Farmerbear

Mine was doing that for the past week. I think it was indicating there had been a power outage but that the clock had not reset to zeros. I changed the time a couple of minutes and it stopped.

Unplug the coffee pot and push in the "1-4" and "TSB" buttons at the same time, hold the buttons in for a few seconds. This will reset the pot and you should be able to brew like normal after that.

the container were the coffee bean go .remove the bean, in the hole were the coffee goes you see the grinder wheel clean the grinder wheel with a brush you may have coffee residue on the wheel thanks for using fixya pierre

Is your grinder in and the lid down? My coffee maker (grind & brew) started beeping after I cleaned it and turned the left knob clockwise with the grinder still disassembled. There's a little button that is depressed when you close the lid with the grinder in there (I'd guess it's a safety feature). I pressed down that button, and the beeping went away.

here is the link to the manual; http://www.cuisinart.com/share/man/34_man.pdf ask again if you still haven't figured it out :)