Question about Car Audio Receivers

Open Question

Kenwood kvt-715dvd won't load cds or dvd

When I turn on, it makes a eject sound. When I try to put in a disk nothing happends. When I try loading throught the setting a little more then half way in this ejects. Saying mech error

Posted by on

6 Suggested Answers

  • 132 Answers

SOURCE: 2001 Mustang 6-disk CD player

does it give an error code? usually it just a gear timing problem, will it load discs that are in it?

Posted on Jan 02, 2008

  • 1 Answer

SOURCE: jvc kd lx111 deck wont eject cd

I just had this problem today and when I attempted to eject the CD it would give me an error message that stated (ERR 32). Apparently this means that there is something blocking the movement of the screen, a little manipulation should help the issue. Another variable could be the Eject lock feature, essentially a "child lock" for your disc. When this lock is activated it prevents the CD in the deck to be ejected. You can change this by holding down the blue source button and the eject button simultaneously for about 2 or 3 seconds. A message should appear saying "No Eject" and one that repeatedly flashes "Eject on" These two things seemed to help me alot when I had this issue. If those things don't work I would recommend calling JVC, much to my suprise they were actually really helpful. Their number is 1-800-252-5722.

Posted on Jan 24, 2009

  • 1 Answer

SOURCE: Kenwood KDC-C717 - E-99 error

There is probably a jammed disc or disc holder. It cant eject the cartridge because the unit cant put the disc back into the cartridge to the left.

Took me a about 20 mins gentle persuasion after removing the plastic front (carefully depress the little plastic clips on the edges and (again, gently, lever the front off) and removing the metal case - half a dozen screws each side and remove the bottom. The top stays fixed to the workings. I could then get into the gap between the top case and workings but be careful not to pull the unit from the rubber antishock mountings etc. and remove the problem disc.

I removed the plastic fascia which surrounds the magazine hole too, not sure if it was necessary..!

Again - be careful not to be rough with it, you dont want to snap the plastic clips, etc and also check the horizontal/vertical adjusters are back on in the correct position if they come off.

Posted on May 16, 2009

  • 6784 Answers

SOURCE: cd won t eject from 2006 Ford Focus mp3 player Get

HI, either the deck assembly is jammed or, the load motor has failed. In this case, you will need to disassemble the entire set in order to retrieve this CD.

The actual loading deck(the part where the CD is located), is surrounded by a metal housing. the gear assembly is probably locked, due to this jam or failed load motor. This will also require a set of precision tools as well. if you find this a bit overwhelming, i suggest taking this unit to a local automotive audio shop. they can dissemble it and, retrieve the CD for a small price.

Posted on Jun 21, 2009

  • 1 Answer

SOURCE: i hooked up my kenwood kdc 128 cd player and nothing works

i had the same problem as you, i own a 98 ford escort, and i couldnt find a wiring diagram that matched the ones in my car . i managed to connect the constant (red) and switched (yellow) to the wires in the car but i had made a mistake with the ground (black) . so i re connected it to where its suppose to go so now the head unit actually lights up and turns on.

now i have another problem because my head unit doesnt stay on for any longer than 1 mintute

Posted on Aug 27, 2009

  • 1326 Answers

SOURCE: I have a Kenwood 6 Cd Changer and it will not

SOunds like the carriage is stuck or has malfunctioned. The only other option is to open the disc changer and force it out by hand.

Posted on Nov 06, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

Six disc changer will not play, eject, or load. making eject noise nothing happens.

it sounds like the photo sensor has failed this unit detects disc and loads them if it blows it thinks it has a disc and will try to eject it over and over

time for a new stereo sorry

Jun 25, 2010 | JVC KD-G110 CD Player

2 Answers

Kenwood kvt-911dvd disc error for dvd play?

you just bought it? take it back it may be a rare case of Dead on arrival.

Jun 10, 2008 | Car Audio Receivers


Kenwood Excelon Manual (KVT-817DVD)

Kenwood Excelon KVT-817DVD Users Manual


Misplaced your Kenwood Excelon KVT-817DVD manual?
Would you like a pdf format, digital, searchable KVT-817DVD users guide?

The Kenwood Excelon KVT-817DVD owners guide is available here.

I hope that helps.

on Apr 02, 2010 | Car Audio Receivers

2 Answers

Eject and load error

Most common cause for this is dirty lens, try a cleaner disk, possibly the one with liquid cleaner.
If this does not work , providing that the engine is spinning you may need to replace the lens inside

Mar 15, 2008 | Car Audio Receivers

2 Answers

Radio works fine, put in a cd and it ejects it.

Unit will not accept
a disc
CD mechanism position out of alignment Press EJECT for 3 seconds to reset CD mechanism position

CD transit screws still in place Remove 2 transit screws located on top of the unit

You can down load the manual here at this site.

Good Luck

Please rate at FixYa!

Dec 19, 2008 | Dual XDM6825 CD/MP3/WMA Player

1 Answer

Toc error

i have had the same deck for four years and installed and removed from 4 different vehicles. the deck has been through some stuff lets put it that way. mine does the same thing as yours, i have found that you just keep ejecting the disk untill it reads. usually only takes a couple times and then mine works just fine.

May 26, 2008 | Kenwood KDC-MP828 CD Player

2 Answers

2001 Mustang 6-disk CD player

does it give an error code? usually it just a gear timing problem, will it load discs that are in it?

Jan 02, 2008 | JVC KD-S680 CD Player

1 Answer

Kenwood kvt-815 dvd

hi bought a kvt-815 dvd player via gumtree was told needed a ribbon,,did have screen in pic but wont do anything at all no power all cables tested working can any one help...

Oct 26, 2007 | Car Audio Receivers

1 Answer

CD won't eject....

you need cleaning and maintenance on your radio if you want to eject the disk theres a little tiny button on the face you will need a pin push it in and this should eject your disk

Sep 27, 2007 | Kenwood KDC-215S CD Player

1 Answer

Kenwood DPX501 won't play mp3s that are burned onto disks

Does' it do both plus and minus cd's? It may only do CDR+ or -

Aug 13, 2007 | Kenwood DPX-501 CD Player

Not finding what you are looking for?
Car Audio Receivers Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4681 Answers


Level 3 Expert

57068 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides