Question about RCA D52W20 52" Rear Projection HDTV-Ready Television

1 Answer

Is there a easy repair

No red convergence

Posted by on

  • Anonymous Mar 31, 2008

    The screen bows at the top and bottom and none of the three colors match up (there are three seperate colored images). This just happened one day while watching it.

  • sopato Nov 23, 2008

    my tv also suddenly started showing three separate overlapping images in three colors.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,314 Answers

If that's a dlp unit they are garbage ive had two and both died in same manner in less than a year one the bulb blew on in three months after purchase then went blank and started making a high pitched squealing sound had to argue with rca cust support after repair shop said they could not fix it rca finally sent me a new one but with less features after i argued with them for another three that one did the same thing after three months now rca wont even talk to me and ive got a 100lbs paperweight that does nothing i was told it was the light engine at a cost of around a grand for part so don't waste your money on a repair shop mine is still sitting there blank and i understand this is a common problem from checking the web just roll it in the back yard spend you money on one that will work im going lcd this time and i do houseld appliances not tvs so dont worry about rating me i like to pass this info on every chance i get just to help my friends at rca

Posted on Jan 02, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red diaiginal shadows


Your convergence has failed and needs to be repaired. Once quick test is to goto your convergence menu and see if you can adjust red and blue. If not its has failed and needs to be fixed. You can call in a repair shop or you can get the parts and instructions from www.TvRepairKits.com and do the repair yourself. Its a fairly easy DIY fix.

Aug 26, 2011 | Mitsubishi WS-55411 55" Rear Projection...

1 Answer

I think i have a convergence problem with my 57f 500 tv it looks like 3d i went into the magic focus and did the manual thing and it seems like the only one that i cant get lined up is the red looks...


Your convergence has failed and needs to be repaired. Once quick test is to goto your convergence menu and see if you can adjust red and blue. If not its has failed and needs to be fixed. You can call in a repair shop or you can get the parts and instructions from www.TvRepairKits.com and do the repair yourself. Its a fairly easy DIY fix.

Aug 01, 2011 | Hitachi 57F500 57" Rear Projection...

1 Answer

My Toshiba 43H70 started having the blue bow up at the bottom. Green and red are good. Convergence will move it a little, but not enough. Any ideas?


Your convergence has failed and needs to be repaired. Once quick test is to goto your convergence menu and see if you can adjust red and blue. If not its has failed and needs to be fixed. You can call in a repair shop or you can get the parts and instructions from www.TvRepairKits.com and do the repair yourself. Its a fairly easy DIY fix.

Jul 18, 2011 | Toshiba 43H70 43" Rear Projection...

1 Answer

3d wavy look...colors are red and green, how do you adjust convergence..on model # 55R-WP4H


Your convergence has failed and needs to be repaired. Once quick test is to goto your convergence menu and see if you can adjust red and blue. If not its has failed and needs to be fixed. You can call in a repair shop or you can get the parts and instructions from www.TvRepairKits.com and do the repair yourself. Its a fairly easy DIY fix.

Jul 10, 2011 | Sharp 55R-WP4H 55" Rear Projection...

1 Answer

How to fix the convergence. We tried lining up the arrows on the left side of the screen (red and blue) but we ran out of adjustment arrows.


Your convergence has failed and needs to be repaired. Once quick test is to goto your convergence menu and see if you can adjust red and blue. If not its has failed and needs to be fixed. You can call in a repair shop or you can get the parts and instructions from www.TvRepairKits.com and do the repair yourself. Its a fairly easy DIY fix.

Jul 09, 2011 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

The screen looks like its in 3D, and when I push the convergence adj button red and blue lines, lined up green line is wavy.


Your convergence has failed and needs to be repaired. Once quick test is to goto your convergence menu and see if you can adjust red and blue. If not its has failed and needs to be fixed. You can call in a repair shop or you can get the parts and instructions from www.TvRepairKits.com and do the repair yourself. Its a fairly easy DIY fix.
Here is an example photo.... louis66_0.jpg

Jun 28, 2011 | Hitachi 43GX10B 43" Rear Projection...

1 Answer

Red convergence


you can get the complete convergence repair kit for your model at the following link which includes both convergence ICs and all the convergence resistors with instalation instructions with pictures, its actually a very easy repair takes about an hour from start to finish. Heres the link
http://servicemanuals.vstore.ca/

Jul 26, 2008 | JVC AV-48WP30 48" Rear Projection...

1 Answer

Red is out of convergence


I would stay away from that repair man. That model has just one Convergence IC number STK393-110 and it takes about 45 minutes from start to finish to remove the old IC and install the new one. You can get the replacement IC at the following link and they provide free instalation instructions with pictures so you can do the repair yourself for less than 30.00. Heres the link. You need just 1 STK393-110 Convergence IC they have free shipping as well.
http://servicemanuals.vstore.ca/

Jun 19, 2008 | Toshiba 42H81 42" Rear Projection...

1 Answer

Convergence


Its hardly ever a problem with the convergence board. The problem almost always is the Convergence amp ICs on the sub Board. You need to replace both Convergence amp ICs their numbers are STK392-040 its an easy repair you can get the parts with free installation instructions at the following link. they also offer free instant messageing with their repair tech when youre doing the repair. The job takes about 45 minutes from start to finish. Here is the link.
http://servicemanuals.vstore.ca/

Apr 14, 2008 | Samsung HCL5515W 55" Rear Projection...

Not finding what you are looking for?
RCA D52W20 52" Rear Projection HDTV-Ready Television Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

jason

Level 3 Expert

905 Answers

matt martin
matt martin

Level 3 Expert

1230 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...