Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Model #WFW8300SW Error code F then 20, what does it mean ?

The machine runs well 2 or 3 loads and then stops and flashed the F and then 20. Called Sears tech support and told me to go to www.repairclinic.com/0078.asp#Duet and there are a lot of codes there, but not F20. Can anyone help me??? Thanks

Posted by on

  • 4 more comments 
  • jcast Jan 02, 2008

    sme problem here, except it does not wash any longer, it will for about 7 minutes and I get the same code.

  • derick4144 Jan 02, 2008

    It just staretd yesterday and I did 7 loads and it did it on 3. The full model number is WFW8300SW00. Thanks for helping, it's extremely frustrating. $1400 less than 2 years ago. Thanks for your help.

  • jcast Jan 02, 2008

    I found this website.

    www.whirlpool.helpcom>Customer support>Search FAQ's

    It helped me!

  • sintravia Mar 07, 2008

    anyone find out what the F20 code means?

    Just bought my washer used, and it does the same thing!

    except it did just go through a whole cycle when I washed one sweater, does it maybe mean the load is too big???

  • daddy evans Feb 20, 2009

    I have the same model I get f 21 code this is the 3rd repair promlem in 12 months I bout it from lowes I will never shop at lowes again my warrenty runs out in about 1 week its 480.00 to renew it the last 2 times there was a sock in the drain one repair person said dont put child socks in the washer what a pile of junk

  • Anonymous Mar 24, 2014

    F20 error code

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,314 Answers

Does it do this a lot dont rate me till were done give me your complete model number

Posted on Jan 02, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sears Electric Dryer is flashing F01 What is wrong?


The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. If the code returns after plugging the washer back in, then the electronic machine control board will need to be replaced.
You can order a new control board from the Sears PartsDirect website.
http://www.searspartsdirect.com/partsdir...
Here's how to do it: http://media.fotki.com/1_p,wkwdftgtbkdgf...


Error code on dryer F01 - Kenmore Elite HE3 Dryer - iFixit

https://www.ifixit.com/.../Error+code+on+dryer+F01 Traduire cette page The F01 indicates a failed electronic machine control board. This error code can ... The Kenmore Elite HE3 is 7.2 cu. ft. capacity electric dryer by Kenmore.

Dryer Sears / Kenmore HE3 - F01 Error Code Main Circuit ...

2q==? 7:35 https://www.youtube.com/watch?v=eWqrn5klxm0 20 avr. 2015 - Ajout? par Jim Dandy Sears Kenmore Dryer Model HE3 - F01 Error Code. Main Circuit Board Repair - Electronic Control Board ...

Error code F1 on Kenmore HE2 electric dryer appeared ...

www.shopyourway.com > ... > Questions Traduire cette page Sears Kenmore HE2 electric dryer; model #11087571601. F1 error message appeared ... Power it back up and see if you still get the F01 error code. If not, then I ...

What does the error code F-01 mean on my Kenmore front ...

www.shopyourway.com > ... > Questions Traduire cette page By unplugging and plugging in the electrical cord, I got the dryer to work again. ... What does the error code F-01 mean on my Kenmore front loaded HE2 dryer? ... My kenmore washing machine 110.46462500 is flashing an error code F.01 ...

Error code on dryer F01 - Kenmore Elite HE3 Dryer - iFixit

https://www.ifixit.com/.../Error+code+on+dryer+F01 Traduire cette page The F01 indicates a failed electronic machine control board. This error code can ... The Kenmore Elite HE3 is 7.2 cu. ft. capacity electric dryer by Kenmore.

Dryer Sears / Kenmore HE3 - F01 Error Code Main Circuit ...

2q==? 7:35 https://www.youtube.com/watch?v=eWqrn5klxm0 20 avr. 2015 - Ajout? par Jim Dandy Sears Kenmore Dryer Model HE3 - F01 Error Code. Main Circuit Board Repair - Electronic Control Board ...

Error code F1 on Kenmore HE2 electric dryer appeared ...

www.shopyourway.com > ... > Questions Traduire cette page Sears Kenmore HE2 electric dryer; model #11087571601. F1 error message appeared ... Power it back up and see if you still get the F01 error code. If not, then I ...

What does the error code F-01 mean on my Kenmore front ...

www.shopyourway.com > ... > Questions Traduire cette page By unplugging and plugging in the electrical cord, I got the dryer to work again. ... What does the error code F-01 mean on my Kenmore front loaded HE2 dryer? ... My kenmore washing machine 110.46462500 is flashing an error code F.01 ...

Feb 04, 2016 | Sears Kenmore Elite Electric Dryer 69278

1 Answer

Error code F-20


WHAT DOES ERROR CODE F-20 MEAN

Oct 03, 2012 | Whirlpool WFW8300SW

1 Answer

On my washer machine appear code F-01, what that mean?


Under the front panel on the bottom of the machine is the error code manual. Mine says a CCU replacement for the F-01 error code.

Nov 22, 2010 | Whirlpool WFW8300SW

1 Answer

I washed a large load in our Whirlpood Duet Washing Machine and it stopped with a flashing F28 code. I unplugged it for 5 minutes and it still will not run a cycle without stopping with a flashing F28...


The error code F28 means one or both of these parts are bad.
Motor Control Unit (8540135)
Microcomputer Machine Control Unit (8540788)
It would be a good idea to order both, as both components have been problematic for error code F28

If you find either the MCU or the CCU(Microcomputer Machine Control Unit) fixed it.

You can download the online repair manual in the below link

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/6545d78b3f479480852571650061b1ba/$FILE/8178558.pdf

On page# 4-20 it shows how to access your MCU.

Jun 27, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Code f 11 and f 20


its not called f-20 its caled f-02 Long Drain ----- means -------
If the drain time exceeds 8 minutes, the water valves are turned off and "F/02" is flashed.
NOTE: After 4 minutes the "Sud" error will be displayed, then 4 minutes later the F02 error code will be displayed.-----------
to resolve the code ---------- Press PAUSE/CANCEL twice to clear the display. Press PAUSE/CANCEL twice to clear the display. globul1a.gif Check the drain hose and make sure it is not plugged or kinked. globul1a.gif Check the electrical connections at the pump and make sure the pump is running. globul1a.gif Check the drain pump filter for foreign objects. globul1a.gif If the above does not correct the problem, replace the pump.
code f-11 means --------
Serial Communication Error
Communication between the Central Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly.----------------- to resolve the problem ------------- Check Wire Harness connectors to the MCU, the motor, and Central Control Unit (CCU) globul1a.gif Check the Drive system for any worn or failed components globul1a.gif Check MCU globul1a.gif Check CCU globul1a.gif Check Motor globul1a.gif Check Wire Harness

Mar 30, 2009 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

WASHER RUNS FOR 1-2 MINUTES, THEN STOPS & STARTS FLASHING H/F


can u switch of hte michine at the wall and leave it for 20 mins and turn it on again

Jan 27, 2009 | Whirlpool Duet GHW9150P Front Load Washer

6 Answers

Error message displayed on LG tromm washer model # wmt2778w


Flashing UE - The display shows:
• Load is too small.
• Load is out of balance.
• The washer has an imbalance detection and correction system. If individual heavy articles are loaded (bath mat, bath robe, etc.) and the imbalance is too great, the washer will make several attempts to restart the spin cycle. If an imbalance is still detected, the washer will stop and the error code will be
displayed.

Possible Solution
• Add 1 or 2 similar items to help balance the load.
• Rearrange items to help balance the load.
• Control error.

Nov 07, 2007 | LG WM-2277HW Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

709 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Sal De

Level 3 Expert

2699 Answers

yadayada
yadayada

Level 3 Expert

80417 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...