Question about Big Button TV Universal Remote
Hi, I recently purchased the omnitech jumbo universal remote control from
Staples to use on my 32" Vizio hdt.v., model number VX32L. However, I can't figure out what the control numbers are. Does anyone know? Thanks!
I have a solution but it is too much info for this tiny screen they have, and there is no support for photos. So, unfortunetly I have to send you to my photobucket account where I posted scanned pictures
Posted on Jan 22, 2008
Use the search code. Turn on the tv then push the search code button next push the tv button over and over until the tv shuts off then push and hold the enter button for a few seconds. It works I just did it 5minuts ago on my Vizio.
Posted on Feb 05, 2008
I can't get the omnitech giant remote to program for my dvd dvp 642 phillips. Does anyone know what the code is? I have tried several codes already without success.
Posted on Jul 05, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I have this remote. But I don't know what you mean by control numbers? Do you mean codes? You can program it by holding down the code button till the red light stays on, then punch the button you want to program, tv or dvd, then press power till your machine comes on then press enter.
Posted on Jan 05, 2008
Here are the instructions for auto code search from the Omnitech manual:
There is another way to set up your controller, that does not use the brand code lists. You can let your
controller search through all of its available codes automatically in order to set the connection to the
target device. To do this, follow these steps:
1.Turn on the target device.
2.Point the controller at the target device and press and hold the Code Search button for around 3
seconds, until the LED light stays red.
3.Next select the type of device the target unit is by using the Cable/TV/VCR/DVD/Sat Buttons (i.e. if
it is a TV that you are trying to control, press the TV button). The LED light should then blink once,
then stay red.
4.Press the On/Off button on the controller slowly and repeatedly until the device you are trying to
connect with turns off. (Note: the LED light will blink each time you press the On/Off button). When
this happens, press the ENTER button in order to store the code and the LED light will turn off.
Posted on Jul 13, 2008
Tips for a great answer:
Nov 15, 2011 | Vizio VA26L 26 in. LCD HDTV
Jul 18, 2011 | Big Button TV Universal Remote
Jun 03, 2011 | Innovage Jumbo Remote Control
Oct 10, 2009 | Innovage Jumbo Remote Control
Jan 02, 2008 | Big Button TV Universal Remote
4,082 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: