When i press a, aq is written for o ,lo written

Question edited into written English.
Question moved from Computers to Proper Category.

Remove the battery overnight to Reset it.

Links on the following page are to cover sheets for Unisa. There appear to be different cover sheets dependent upon the status of the sender in terms of the organization.

https://lo.unisa.edu.au/mod/book/view.php?id=1843&chapterid=567

The Bose Wave Radio has two brightness levels: Bright Hi (with a range of 8-15, and default of 10) and Bright Lo (1-8, default 4). The radio automatically goes from Hi to Lo when a room is darkened so the display doesn't interfere with sleep.
On recent models you can reset the defaults to make the display brighter or dimmer in both Hi and Lo levels.
1. Press and hold the Alarm Setup (Menu) button on your remote until -setup menu- appears in the display.
2. Then press the Tune/MP3 button until Bright Hi- appears. Use the Time - or Time + buttons to change the settings.
3. Go to Bright Lo- and adjust that setting too if necessary.
4. Press Alarm Setup (Menu) again to exit setup, or simply wait 10 seconds.
You're done! Note that if you set both Hi and Lo to 8, the brightness will stay the same all day and night.

Env?eme un correo electr?nico y yo se lo enviar? a usted, Joe
[email protected]

Si necessita mas asistencia, permita que sepa. Si esto ayuda o resuelve el asunto, por favor lo valora y da una recomendaci?n para mi respuesta. Gracias, Jose

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

SALUDOS A TODOS TENGO EL CONTROLADOR PARA (AQSONIC AQ-715)
PERO NO SE COMO SUBIRLO PARA QUE USTEDES LAS PERSONAS QUE LO NECESITAN TENGAN ACCESO A EL DRIVER SIN NINGUN COSTO . MI E-MAIL ES : [email protected]. POR FAVOR ESCRIBAN A MI EMAIL PARA QUE ME DEN UNA IDEA DE DONDE Y COMO SUBIR EL CONTROLADOR ... GRACIAS Y SALUDOS A TODOS NUEVAMENTE ...

Press BAKE and BROIL hi/lo

pads for 2 secs till display

show "SF".

Press BROIL hi/lo pad. The

display will show "F", if yall

want "fahrenheit" then hit

START. Press Boil hi/lo again

and yall will see a "C", if

yall want "centegrade" then hit

START. Most stoves.
If you ha listed a make and model it woulda been much easier.


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

In my lg ac it automatically shut downs and restarts and lo is written in stead of temp what is the problem and what should i do?

replace it with 9v lithium battery that you can get anywhere.
http://www.google.com/products?q=+9v+lithium+battery&hl=en&aq=f

The device has two different alarms: One is based on the time and one is based on temperature.

To disable the time alarm:

1. Press the Alarm button on the front until the "bell icon" on the display disappears.

To disable the temperature alarm:

1. Press and hold the "Temp Hi/Lo" button.
2. Use the arrow buttons to select the high/low temperature alarm.
   
3. Press the "Temp Hi/Lo" button again.
4. Use the arrow button to select "Off".
5. Press the "Temp Hi/Lo" button again.

Please refer to the owner's manual as a reference. Hope that helps!