Help! My stainless steel Jenn Air Dishwasher has rusty spots on the outside handle and the area just above the handle on the outside door is all blotchy. I use a stainless steel cleaner but it doesn't help. What can I do? Should this be happening on an $1100 dishwasher?
I would try a product called Evapo-Rust! Evapo-Rust will remove the rust without damaging the stainless steel finish on your Dishwasher. After you remove the rust you will then want to apply a rust inhibitor to keep it from coming back. You can go to a website called http://www.rustremover.biz or http://www.nebraskanhotrod.com to learn more about Evapo-Rust. You will also find that they sell a water based rust inhibitor that will work to keep the rust from flashing back for up to 6-months.
Jenn Air makes great products, don't blame them. Your type of stainless steel is a consumer grade that has less nickel-chromium in the mix making it affordable to the consumer. The surface needs to be "pacified", DeBruce Polish will REMOVE THE RUST and PACIFY the surface. We get Debruce Polish at debrucepolish.com.
My Jenn Air dishwasher has water standing in the bottom after every use model #JDB1111AWS. I'm using...
(More)
My Jenn Air dishwasher has water standing in the bottom after every use model #JDB1111AWS. I'm using the drying cycle. It gets smelly as it sits between using
Does my dishwasher have a filter that needs cleaning? My dishes are coming out dirty with particles...
(More)
Does my dishwasher have a filter that needs cleaning? My dishes are coming out dirty with particles stuck all over them.
We have a Genn Air JDB-5 Dish washer, last night when we turned it on and closed the door, all of a...
(More)
We have a Genn Air JDB-5 Dish washer, last night when we turned it on and closed the door, all of a sudden a funny sneezing like sound came and the washer stopped. The water didn't drain and the cycle never completed. We tried again by setting the cycle to normal and pushing the start button, on closing the door, the usual water hissing sound came for about ten seconds, but after that nothing. The water didnt drain and the cycle never started. If some one can help with this, it would be great.