Question about Polaroid FCM-0710 7 in. Television

2 Answers

Polaroid FCM-0710 - major issue

After following the instructions to the tee on installing my new Polariod FCM-0710 in the kitchen , I cannot figure why it will NOT turn on !!!
All connections are connected correctly (from instruction manual) . The issue is NO power , NO sound , NO picture , nothing .
Does anyone out there at "FixYa" know any secrets ???
Signed , Dazzled and Confused

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just fix one. LCD screen do not turn on.
Open the TV screen and look for the white fuse F1 in the ballast board. it is a 5 inch long half inch wide board with two connectors. Mine was reading over 120 ohms, as fuse must read zero ohms. If reading more of that just sold a thin wire jumper on it.
Sorry for my English as a ******* I just speak Spanish.
Solution is not for Republicans!

Juan M. R

Posted on Sep 20, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Buy a new after all their not that expensive

Posted on Jan 02, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Is there free polariod i936 software to install?

Remove the SD card from the camera and use a card reader on a computer to transfer the files.

Oct 10, 2012 | Polaroid i936 Digital Camera

1 Answer

How do I burn from another DVD? I'm able to play a DVD on the RW208 model. But I can't figure out how to burn a DVD. I placed a DVD I want to copy from in the burn then hit burn to disc. Took that out...

if its a dvd rom you cant burn if its advd burner you need a burning program such as nero you can download free ones from the net at cnet,,major geeks,tucows,freeware to name a few
hope this helps

Sep 28, 2010 | Polaroid Polariod 8X Slim DVDROM Black...

1 Answer

Tv turns on, works for about 20 seconds and then screen goes black but sound continues its a el cheapo Polaroid Flatscreen

Ok, I found major issues with polariod part of witch was the eletrolitic capacitors. What they do is swell up and cause this issue your point out to me.

Here is a link to my tip on how to fix it.

I know if you took this to a shop it would not be worth the money to repair because you can buy a new one for a lot less money. But if you did it yourself then you can save a boatload of cash and the TV to boot.

Thanks I am so happy to help please rate my solution with the thumbs to your top right and leave me some feeback!!

Mar 06, 2010 | Polaroid TDA-03211C 32 in. LCD HDTV

1 Answer

Polaroid DVD Player PDM-0742 not playing dvds

I was a circuit board engineer for the on-chip set. there was a major techical issue with the units but due to the cost of investments by polariod, they decided to sell them to the public anyway. the promblem is in the chip that only works for a very short time before is overheats and the system will show "bad disk"

Jan 23, 2009 | Polaroid PDM-0742 Portable DVD Player

1 Answer

I need a new battery for my Poloroid DVD player.The model is bt-0710

go to the link for purchase--

Nov 12, 2008 | Polaroid PDX-0073S Portable DVD Player

1 Answer

Burn out

The battery is probably not the only problem. If the display won't lite it is either the inverter board or the back lites

Apr 13, 2008 | Polaroid FCM-0710 7 in. Television

2 Answers

How to auto program -

If you are connecting dish Network to the TV you will need to go thru a receiver first.. then whatever input you connect the receiver to then you will be able to get the channels on that setting.. If that is what you are trying to do?

Feb 16, 2008 | Polaroid FCM-0710 7 in. Television

Not finding what you are looking for?
Polaroid FCM-0710 7 in. Television Logo

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75178 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Jaime Hernandez

Level 3 Expert

2335 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides