1.Take out both the ink cartridges, wait for 5 seconds. 2.Take out the printhead, and close the printer access door 3.Take out the power cable without turning OFF the printer, and wait for 30 seconds. 4.Now connect the printer with the power cable, and turn ON the printer. 5.If the printer is giving an error” printhead missing”, now put the printhead back. 6.Closing of the printer access door brings up error message “missing cartridge.” 7.Insert both the ink cartridges into the printhead. 8.Close the printer access door, and wait until printer gets ready for printing. 9.Give a print command after loading paper in the upper tray.
Almost every day my black printing on model ESP7 stops and I have to go into maintenance and clean...
(More)
Almost every day my black printing on model ESP7 stops and I have to go into maintenance and clean print head to get it to print. What do I do to correct this defect?
Print, particularly black, is inconsistent. Keep replacing the cartidges, go through maintenance,...
(More)
Print, particularly black, is inconsistent. Keep replacing the cartidges, go through maintenance, etc., etc. First print job after looks OK; everything afterward comes out with skips in the printing.
I can't print black. Have used clean mode, changed cartridges, aligned the heads, etc. Nothing...
(More)
I can't print black. Have used clean mode, changed cartridges, aligned the heads, etc. Nothing works. What else can I do?