Question about Samsung WE356A5W Washer/Dryer Laundry Pedestal

Open Question

Samsung washing machine displaying EA error code

The tumbler is not rotating. Probably due to the motor which stopped working. The model is P1205j 1200

My washing machine Samsung fully Auto Fzzy logic... error code 1E, what is it mean....? Please help. Rohaidi Malaysia.

Posted by on

  • Anonymous Apr 01, 2008

    the tumbler rotate but delay delay time drop from 47 to 44. Then 1E error code appear

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Error message 1E is displayed at start up samsung model SW75C3S

1E error mean there is malfuntion on your sensor pressure. Maybe because the sensor is damage or rusted. You must replaced, it's cost me about $15

Posted on Jun 10, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washing machine EWT704S keeps displaying error code EA.


Found this

Re: Samsung B1113J "error code EA" A Tech I called said auto sensor was the tach on the motor.

Check for proper resistance across pins 3&4 at the motor plug (2 red wires). Should be 150 ohms.

If proper resistance, could check connections at board and board itself.

Though I wonder what the error would be if the motor wasn't turning and this looked like an error with the tach. Would this this be an EA error too?

Jan 06, 2016 | Washing Machines

2 Answers

Samsung Model WF220 won't spin after it fills with water. It displays Error code 3E.


This video will help you diagnose the fault on Samsung Model WF220 3e error codes and the video will help you solve the problem

Sep 08, 2012 | Washing Machines

1 Answer

ERROR CODE E 60 washing machine zanussi ZWG1100M


This can be due to error in the control board. Shut down and remove plug and when switched on press down the start/stop button. If the error does not clear this can be a fault in the motor drive within the control panel board.
Remove the panel and check the connections to the motor, check the motor and the capacitor to the motor or if the motor is jammed.

Jul 03, 2012 | Zanussi Washing Machines

1 Answer

E8 front loader washing machines


OVER CURRENT ERROR - Display shows 8E.IPM fault signal (this is caused by the overload of the MICOM INTO during motor action).
IPM: Integrated power module. The IPM controls the motor.
If the fault (low signal) happens to be sensed even once during the washing/rinsing stage, the motor stops immediately. However, during the dehydrating stage the signal is to be sensed, when the number of signals reads more than 6 per 500ms during the Washing or Rinsing cycle action.
If the motor stops working, in one direction ten times, "8E" Error is displayed.
During dehydrating, when the overload is sensed, the motor stops working at once and then feeds back to the initial stage of the dehydration unbalance sensing. When the feed back has occcurred twice, Error "8E" is displayed during the dehydrating unbalance sensing, No error happens by overload sensing. When it happens at more than 800rpm, the process is stopped compulsorily. Power Switch OFF can clear the overload error.

HOWEVER, the UK White goods website says:

E8
Temp too high on low temp washesNormally this will be the wash temperature thermistor or NTC that's faulty, please contact us if you need the thermistor with the model and serial number.


You can find more about your Samsung Washing Machine error codes at:
http://www.keepingupappliances.com/repair-help/appliance-repair/washing-machine-help/samsung-washing-machine-error-codes/
or
http://www.ukwhitegoods.co.uk/help/fix-it-yourself/fault-codes/laundry-fault-codes/3069-samsung-washing-machine-fault-codes.html

Jun 21, 2011 | Samsung Washing Machines

2 Answers

As soon as the machine is on an error message of 3E appears and the machine stops


3E - MOTOR RESTRICTION ERROR
Hall Senior is sensed every 5OOms. 1 second after motor starts to work.

If data of hall sensor is less than 2 (2RPM), the Washing motor will stop at once.

During Washing and Rinsing when a motor restriction is sensed, the motor stops and then proceeds to the next water -flow action. If the motor stops working and this happens in one direction ten times, "3E" Error is displayed.

During dehydrating. when a motor restriction is sensed. the motor stops working and then returns to the initial stage of the dehydration unbalance sensing cycle. After ten times, "3E" Error is displayed, When the motor Is told to stop because of an operating function. no error is shown.

Power 81W OFF can clear the motor restriction error.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Sep 14, 2010 | Samsung WF337AA Front Load Washer

2 Answers

Hi, i have front loading samsung washing machine,capacity 5.5 kgs. Its showing 3E error. could i know what it is and how can i get my machine working again???? thank you, Vaidehi


front loading samsung washing machine,capacity 5.5 kgs.This video will help you diagnose the fault on 3e error codes and the video will help you solve the problem

Sep 04, 2010 | Washing Machines

1 Answer

My washing machine from LG has an error code CE and will stop automatically after maybe 2 minutes from starting the cycle. How can I fix it


Hi

Error code CE means MAIN PWB ASSEMBLY is out of order. This may also occur due to short circuited Winding in the STATOR ASSEMBLY. Check this by rotating the drum with your hand. If you are not able to rotate it then the motor is locked /bad. However, if it is rotating without much resistance then probably the motor connections are loose. To do this take the back cover off. Take the big nut off and remove the motor rotor. Remove the bolts holding the motor windings. Remove the electric plug on the sensor and unclip it from the motor winding. If these things are fine then you would need to make sure the connectors on Main power supply board are fine. Please post back for further assistance.

Daniel

Sep 01, 2010 | Washing Machines

2 Answers

Samsung error code 3E?


3E - MOTOR RESTRICTION ERROR
Hall Senior is sensed every 5OOms. 1 second after motor starts to work.

If data of hall sensor is less than 2 (2RPM), the Washing motor will stop at once.

During Washing and Rinsing when a motor restriction is sensed, the motor stops and then proceeds to the next water -flow action. If the motor stops working and this happens in one direction ten times, "3E" Error is displayed.

During dehydrating. when a motor restriction is sensed. the motor stops working and then returns to the initial stage of the dehydration unbalance sensing cycle. After ten times, "3E" Error is displayed, When the motor Is told to stop because of an operating function. no error is shown.

Power 81W OFF can clear the motor restriction error.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Aug 12, 2010 | Samsung WF328AAW Front Load Washer

2 Answers

UC code on my Maytag Neptune Washer FAV6800WW


HI. this uc code represents a no spin state of the unit. this is caused by a faulty Motor control assembly. you will need to replace the Motor control assembly. this will fix this issue and, restore the normal actions of the unit.

This Motor control assembly will cost about $219.00.

Jun 18, 2009 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

E8 error code


8E - OVER CURRENT ERROR
IPM fault signal (this is caused by the overload of the MICOM INTO during motor action).

IPM: Integrated power module. The IPM controls the motor.

If the fault (low signal) happens to be sensed even once during the washing/rinsing stage, the motor stops immediately. However, during the dehydrating stage the signal is to be sensed, when the number of signals reads more than 6 per 500ms during the Washing or Rinsing cycle action.

If the motor stops working, in one direction ten times, "8E" Error is displayed.

During dehydrating, when the overload is sensed, the motor stops working at once and then feeds back to the initial stage of the dehydration unbalance sensing. When the feed back has occcurred twice, Error "8E" is displayed during the dehydrating unbalance sensing, No error happens by overload sensing. When it happens at more than 800rpm, the process is stopped compulsorily. Power Switch OFF can clear the overload error.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

May 02, 2009 | Washing Machines

Not finding what you are looking for?
Samsung WE356A5W Washer/Dryer Laundry Pedestal Logo

Related Topics:

556 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Washing Machines Experts

Jaime Hernandez

Level 3 Expert

2336 Answers

shaun taylor

Level 3 Expert

1527 Answers

The Knight
The Knight

Level 3 Expert

75304 Answers

Are you a Samsung Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...