Question about GPX RDT4004SP AM/FM Radio

2 Answers

Setting the stations on memory

I cannot figure out how to set the stations on the memory. Otherwise the raido works fine.

Posted by on

  • Anonymous Sep 18, 2008

    damn that fixed it! i thought i had tried everything!

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

OK HERE'S WHAT YOU DO


1. USING THE UP AND DOWN TUNING, TUNE IN THE STATION

2. PRESS THE MEM SWITCH (LEFT SIDE OF ROUND SWITCH)

3. PRESS STATION LOCATION

4. PRESS MEM AGAIN ---- THAT'S IT

SUMMARY: TUNE, MEM, SET STATION, MEM

Posted on Jan 20, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Well Dave, Most offen there's a button that you haf to hold in to set the stations. Keep looking.............. :-)

Posted on Jan 02, 2008

  • DieHarder Jan 03, 2008

    Hi Dave,
    Sorry that my anwser was inappropriate to you. I've had other radio's that did the same thing. That by trial & error I found the button that did what I wanted to do. Sometime's you haf to hit two buttons to set the station you want. I hope it works out for you.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

This is an RCA portable radio & cassette player. It is not in a car.


tune what you want then press memory set and the number where you want it .

Apr 16, 2016 | RCA AM/FM Stereo Cassette Recorder...

1 Answer

Lock ion a radio station


TO PROGRAM THE MEMORY BUTTONS
Ten FM and five AM radio stations may be independently set. After programming the buttons,
pressing 1, 2, 3, 4 or 5 will instantly change the frequency to the preset station.
1. Turn power on.
2. Set the radio to desired station (see Tune or Seek Function).
3. Press and hold one of the desired memory buttons (F). The station setting begins flashing in
the LCD display (G). Continue to hold the button down until the flashing stops. The memory
button is now set.
4. Repeat steps 2 and 3 to set the other memory buttons.
Please see the attached images for the figure options.

25239582-3oowul2lzypkth3pujh3nvzi-2-0.png

25239582-3oowul2lzypkth3pujh3nvzi-2-2.png

Oct 19, 2014 | Dewalt DCO11 Radio

1 Answer

How do you set the time on RC591-A (RCA Docking Alarm Clock)


None of these answers works! When I tried the first option, the clock DID NOT flash at 12:00 a.m. Since that didn't happen, none of the following steps did either.

The second option didn't work either. Holding the set key never made the display go to a colon, flashing or otherwise. Again, using the forward and back keys didn't work as described.

The third option with a link to another website led to instructions on a power tool and had nothing whatsoever to do with the clock on the docking station.

The fourth option doesn't give any instructions after you hit the time you want to set. The time DOESN'T stay where you set it. It once you release the forward or backward keys, it reverts to the original time that was on the clock to begin with.

None of these answers works at all. I was given the iPod touch and the radio docking station secondhand from my sister and she doesn't have either the instruction manual or the special batteries that go in the battery compartment. The clock on the iPod itself is fine. I finally figured out (on my own) how to turn off the danged alarms and timing mechanisms but cannot set the clock.

Nov 07, 2011 | Audio Players & Recorders

1 Answer

I can't figure out how to set the radio station pre sets


hi,
there is no auto presetting available. u have to set all channels in preset manually. if u power off the subwoofer all setting will be erased.for manual preset do the following.


1. Press the FUNCTION button to select "TUNER".
2. Press the FM/AM button to select a band.
3. Select the station you want to listen to (Hold down the TUNING Up or Down button until the
frequency display begins to change. When a station is tuned in, the tuning process will stop automatically.)

when it tune the first station available do the following to preset it,
4 .Press the MEMORY button.( on remote)
5. Within 5 seconds, select a preset channel to store the
station using the PRESET buttons of the remote control
unit.
6. Within 5 seconds, press the MEMORY button.(The station is stored and the MEMORY indicator goes off. To store more stations, repeat steps 3 to 6) .

for listening preset ed station ,Press the PRESET button repeatedly until the desired
preset station is found.
ok

Dec 24, 2010 | Teac CD-X9 Shelf System

1 Answer

How do you set the radio stations?


With my ilive ish3 soundbar, you find an unused memory preset, go to the station you want to program, press MEMORY and while the display is still flashing press MEMORY again. Took a bit of trial and error to figure that one out.

Jun 12, 2009 | Apple iLive IBCD3816DT Portable 2.1...

1 Answer

How to set radio station memory for jeep cherokee 2000?


Go To The Station You Want In The Memory And Press And Hold The Number You Want It On.

Jan 12, 2009 | 2000 Jeep Grand Cherokee

1 Answer

7835 pre set stereo


tune to station ,press (for example)1 and hold till it starts blinking , then press 1 again,continue in this manner until you've set all presets.

Dec 05, 2008 | Alpine CDM-7835

1 Answer

I need a raido unlock code


Contact Service Station with Original Purchase Bill and other Original Documents.

Jul 27, 2008 | 1991 Saab 9000

1 Answer

Cdx m 630


Do you lose them only after the car is turned off? if so, your 12 volt Costant wire (yellow) is hooked to a switched 12 volt source.

Nov 08, 2007 | Sony CDX-M630 CD Player

2 Answers

How to set Stations


u set up the channel u want with "tun.up"\"tun.dn" press the "mem.ch" for five sec untill it flickers or beeps now u know its in the memory do so 4 any station u want

Feb 01, 2006 | Jensen SAB-55 Radio

Not finding what you are looking for?
GPX RDT4004SP AM/FM Radio Logo

Related Topics:

749 people viewed this question

Ask a Question

Usually answered in minutes!

Top GPX Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5580 Answers

Are you a GPX Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...