Question about Samsung HL-R4266W 42" HDTV-Ready Projection Television

2 Answers

Hl-44266w screen allignment

I have a dark line down the left side of my screen.How do I allign it without calling in for service?

Posted by on

  • 1 more comment 
  • nfigot Feb 25, 2008

    Same issue - does anybody know how to find a guide to the adjustment for the light tunnel... sounds to me like trying to adjust that would be the first step. Also - anybody know how hard it is to replace and then recalibrate a replacement of the light tunnel if it comes to that? I have a place that wants $300 for the job including the light tunnel, but only $75 of that is the part and $225 of that is labor.

  • nfigot May 11, 2010

    Oh for Williston - my issue is the shadow - definitely see the image behind it... pretty sure it is my light tunnel. Anybody know how common that is to go out after less than 3 years? Seems pretty shoddy to me.

  • George
    George May 11, 2010

    Doe's the line look like a shadow or is it black w/no image on it?.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Williston - mine has the image behind it - it starts on the left side top corner and runs down at a slight angle to the bottom where it is about a few pixels at the top and maybe 1/3 to 1/2 inch by time it gets to the bottom. Throughout the "shadow" you can see the image behind it.

Posted on Feb 25, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Don't recommend replacing the light tunnel if you never had any experience with DLP optical systems. you need to pay careful attention to the way you remove any screws or you will be forced disassembling the engine multiple time to get the alignment correctly.

Posted on Feb 25, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I moved to a new home and the printer was stored for a few weeks on its side. Now when I print it prints only on half of the page vertically - meaning I have text on the right side of the page and blank on...


Seems to be u r not online... Normally that issue comes up when there is an issue with allignment or with catridge...
You can go to control pannel and then click on printer and scanners, go to last option maintainace.. there u can find the options for the allingment.
Try this Hope it will work!!

Jul 31, 2010 | Brother HL-5240 Laser Printer

2 Answers

I dont know how to allign my i mate pda 2k. how? pls help me.


Go to the "phone programs" screen page and at the bottom left,select the touch screen allignment option.select and follow the instructions.You will have to continue tapping the cursor till it stops moving.Then your screen will be alligned.

Jul 03, 2009 | i-mate PDA2k Pocket PC

1 Answer

Red color distortion.


You have a Convergence problem. Most likely the STK392-120"s are bad and possibly a few resistors. Not something you should attempt if you've never done one. I would recommend calling a service co. in to repair it.

Apr 23, 2009 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Ricoh Aficio 3025 Copier LCD Touch Screen out of Allignment


It's not in service mode, but rather in the 'self diagnostic menu'. Access it as follows:
Press "clear modes", 1 9 9 3, "clear/stop" (5 times).

** Do not try any other adjustments in this mode...only touch screen


please rate me :)

Apr 10, 2009 | Ricoh Office Equipment & Supplies

1 Answer

Everytime that I print, I get 3 messages on the screen


Hi yvetteb92, 

Please allign the catridges on the printer, using printer front panel menu settings.
Click setup scrol down to tools and u would have option to allign the catridges, allign it and it should take care of the problem.



Regards,  raj_p5983

Jan 16, 2009 | HP OfficeJet 7410 All-In-One InkJet...

1 Answer

Red line runs from middle of screen to right bottom and bends in middle


look the only thing u can do is have someone put the parts in for u the parts alone is 40-$ 60.00 and maybe $ 150 in labor that is all u should have to pay. that is what i would charge a customer to repair there tv set and it can be service right there in your home.i hope this helps marty

Oct 13, 2008 | Panasonic PT-51HX41 51" Rear Projection...

1 Answer

Failure to Allign


This could be the Fuser Assembly. The Fuser is the unit that heats up and makes the toner ahere to the paper. The fact that it is smearing, means that the Fuser is not heating correctly. I would call for service on it.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Sep 02, 2008 | HP Photosmart C7280 Laser Printer

1 Answer

Timeingbelt is off on 1999 kia


Your either going to have to get the allignment tool (sometimes you can rent from autoparts store. Otherwise check out the below. You will need 2 people to do this manually without allignment tool

Kiatechinfo.com will get you all the information you need when working on a kia 2nd only to a chiltons or haynes manual.

For kiatechinfo.com register (its free) then select the information for your car make model engine. Then either do a search for timing belt or pick from proper items in cloumn to the left.

Aug 17, 2008 | 1999 Kia Sephia

1 Answer

Red and green colors won't allign....


There is one way. Get way to go in to service menu and set conversions manualy. Remember to save. Tv will be ok

Dec 25, 2007 | Toshiba 46HM95 46" HDTV

Not finding what you are looking for?

Open Questions:

Samsung HL-R4266W 42" HDTV-Ready Projection Television Logo

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75756 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...