open the top cove ,right and left cover in right side of the printer you will see three spanger replace the spanger which one touched to registration unit ........... clean the registration unit and check..........
The Kyocera Mita FS1010 has a permanent orange light on the 3rd row down - paper feed roller ?...
(More)
The Kyocera Mita FS1010 has a permanent orange light on the 3rd row down - paper feed roller ? Checked internally - all looks OK, cartridge new, no jams apparent. Any ideas ?
How can I connect my older Kyocera Mita FS-1010 (with a parallel port) to a Macbook with Mac OS X...
(More)
How can I connect my older Kyocera Mita FS-1010 (with a parallel port) to a Macbook with Mac OS X 10.5.6 which doesn't have a parallel port, but ony 2 USB ports? I tried with a MANHATTAN PRODUCTS Parallel to USB Cable, but apparently, that won't work with Mac OS X (Windows only, apparently). The result is, when I try to print, it says "Printer offline". I then tried using a print server (installed the printer with Gutenprint driver), trying it via System Config, and also via CUPS, but all to no avail. All that happens when I try to print is a prompt saying "Network host is busy, trying again in XX seconds". The printer works, I tried it with the same MANHATTAN Parallel to USB Cable on a Windows PC. Is there any solution?
when printing the whole paper is printed wavy gray. I mean if I wanted to print an empty page it...
(More)
when printing the whole paper is printed wavy gray. I mean if I wanted to print an empty page it will come out gray instead of white. please I need a solution, It used to work very well before.. but then this gray thing started and in case you should know I replaced the toner three times and the gray thing started when the first replaced one was about half.