Question about Projection Televisions

2 Answers

Tv help i av a sagem axium hd-d56 tv and it keeps turning itself off , there is a light that appears and keeps flashing it as a picture like a key upside down i have a sagem axium dlp rear projector 50" tv which was workng fine yesterday and now today i turn it on and it comes on for a few seconds then goes back into shut down mode (flashing orange light) then goes back onto standby (solid red light). the bulb light hasn't come on nor the temperature llght so am assuming that those are not the problem but don't know what it could be any help would be much appreciated

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: tv help

I have just bought a digital tv but some times the picture goes blank for about30 secs can you help

Posted on Jan 01, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 579 Answers
Re: tv help

This is bad. You need to either be under warranty on these big screen TVs or get the service manual. Especially since this is an off brand.

Posted on Jan 01, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

During our recent move we broke the screen of our Sagem Axium HD D56B DLP TV. Any chance to get this fixed here in the US?

Yes, contact service shops, they may have a junker they can sell you the screen off of. Take an approximate measurement for them so they can look for a screen.

Jan 18, 2011 | Projection Televisions

3 Answers

HDMI settings wouldn't work


What did you do to lose the HMDI output? How is everything exactly hooked up?

Apr 30, 2008 | Projection Televisions

1 Answer

Color wheel has broken and needs replacing

Hi Steve.
replacing the colour wheel is possible, you will need to strip out the light engine from the TV, and open it up to gain access to the colour wheel assembly. A replacement colour wheel is about £250 from sagem, although you can buy an equivalent wheel from the US for about £80.
Check on the avforums site in the RPTV section, there are a lot of helpful people who have replaced their colour wheels successfully. 

Mar 31, 2009 | Projection Televisions

1 Answer


You wont get a replacement screen on this model as its suppliers dont make a replacement screen. But I do know someone that has got one of these as parts for sale.
01280701160 is the number he is in the uk.

May 01, 2008 | Projection Televisions

1 Answer

Sagem 50" DLP Rear Projection TV fault

Sounds like your lampis going out.

Feb 14, 2008 | Projection Televisions

1 Answer

Sagem Axium 45

I believe that the correct fuse should be a 20mm 0.5 amp - maybe that is blowing if it is an under-rated fuse? also, the replacement bulb is available in 5kV and 15vk - you need the 15kV variety.

Jan 12, 2008 | Projection Televisions

3 Answers

Tv wont power up makes a noise but no picture

Your power transformer is likely shot. It'll cost at least $200 to have it replaced. Someone can come to your house to diagnose it. Usually costs around $65.

Nov 03, 2007 | JVC AV-56WP74 56" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers


Level 3 Expert

56797 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides