Question about PC Desktops

1 Answer

Unhibernating I have a Fujitsu-Siemens Scaleo PC that i set to hibernate last night. I unplugged my iPod after it had finished hibernating and it woke up again which was fine, so i set it to hibernate again. Today when i try to start it NOTHING HAPPENS!!! Now it won't power up at all. I have unplugged. I have unplugged and replugged everything, turned off the master power switch at the back till it drains and when i turn it back on i get a brief flash from leds on the front but thats it. Running XP media centre, service pack 2 Anybody any ideas? Dave

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 263 Answers
Re: Unhibernating

You have to start doing a test on secuences first you have to make sure the power from the outlet to the end the cable it has 120 v ac if there is power you have to open the case to check the power suply output to the motherboard there is a power suply testers you can get that on fry'z electronics store i think thats where your problem is located power suply after you do this test post it back to see if does not fix the problem if does fix it leave your feedback

Posted on Jan 02, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I can't find a driver for my grafique cart of siemens fujitsu scaleo 600 thank's for help :)

on this page
type scaleo 600 for searh
you will be redirected to drivers download page

Feb 22, 2011 | Fujitsu Siemens SCALEO 600 (FSP:83C005617)...

2 Answers

I want to download sound drivers for my fujitsu siemens scaleo 600

on this page
type sclaleo 600 for searh
you will
be redirected
to drivers download page

Jan 09, 2011 | Fujitsu Siemens SCALEO 600 (FSP:83C005617)...

1 Answer

Uninstall network driver for fujitsu siemens scaleo c

go to device manager by typing in start search device manager. under network adaptors right click on the network device you want to uninstall. click uninstall.

Apr 08, 2010 | Fujitsu Siemens SCALEO 600 (FSP:83C005617)...

1 Answer

Ich habe keinen Audiotreiber mehr auf meinem Computer Fujitsu Siemens Scaleo 600

The German download page is found here
Fill in the field: Bitte geben Sie die Serien-/Identnummer des Gerätes oder den Produktnamen ein: "Scaleo 600"
Then open Audio, look up in the manual of your Scaleo 600 wich audio
chipset your motherboard has onboard to download the the correct drivers.

Note: Use the Fiujitsu Siemens site with Internet Explorer because it does not work very well with Firefox and next time putt your question here in English, you'll get more help in this way.


Jan 08, 2010 | Fujitsu Siemens SCALEO 600 (FSP:83C005617)...

1 Answer

I cant install sound sistem to my pc

Hi there.
Download all the drivers you need for scaleo 800si here >>>>>>

Good luck and thanks for using FixYa!!

Mar 17, 2009 | Siemens Fujitsu SCALEO 800Si 2410 Silent+...

1 Answer

Finding the videocard in a Fujitsu Siemens Scaleo 600 PC

firstly check the pci slot where your moniter you plug in it. and change the card.

Nov 29, 2008 | Fujitsu Siemens SCALEO 600 (FSP:83C005617)...

3 Answers

SCALEO 600 P253

I had the issue. Bought second hand motherboard on ebay and it fixed the problem. Apparently its a common issue with the motherboards used in the Scaleo 600

Sep 14, 2008 | Fujitsu Siemens SCALEO 600 (FSP:83C005617)...

1 Answer

Onboard Sound Drivers and Video Controllers

Hi EsteG, found all your drivers for your SCALEO 800, these are also used for the SCALEO 800Si 2410 Silent+. They call it the 800 series, for XP. Click the link below.

Because it's the whole 800 series you'll need your manual to pick the correct Audio driver as noted in your manual. To narrow down the ammount of drivers in each area. There should be a sticker on the PC that has the serial No# . Enter that number on this link below. (Siemens Fujitsu) does not make this easy.

If I can be of more service, just ask.
Good Luck & Kind Regards.


Mar 25, 2008 | Siemens Fujitsu SCALEO 800Si 2410 Silent+...

1 Answer

Power light turns amber after shut down

Firstly please install Service pack 2, there are too any security problems with service pack one and power settings problems, this can be ordered free of charge from Microsoft or downloaded. When you say it boots up when you plug it in do you mean it comes out of Hibernation and returns to the desktop saying programmes are running or does it do a full boot up. Sounds as if you need to go into the bios to enable ACPI, see this post on how it's done. Go into control panel>power options and click advanced tab to make sure the power button at bottom reads 'when i press the power button on my computer' 'SHUTDOWN' Then on the hibernation untick enable to see if it cures it.

Nov 07, 2006 | Fujitsu Siemens SCENIC L PC Desktop

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts


Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

18258 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides