Question about Kodak EasyShare C633 Digital Camera

1 Answer

Kodak C633.... Hello....I would like a few suggestions on what i can do. It was a few weeks ago while grabbin' my camera an when i pulled it outta the case it slipped b4 I got a hold of the strap an it dropped onto carpet. Everything works fine on it except the LCD screen shows horizontal lines that are spaced a pinky finger apart from top to bottom. Can still make out pictures an stuff..the lines are about a finger-nail of thickness. Do I need to replace the LCD? An if I don't...how long will it take b4 it bleeds internally an I cannot see anything? TY John

Posted by on

  • k1tk9t Mar 08, 2008

    the same thing happened to me, I'm not sure if it was dropped, but it is completely blank now, can this be fix/replaced or should I just buy a new camera

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 477 Answers

No It can be replaced for under 100.00 and you keep your camera. It is a pretty easy fix.

Posted on Mar 25, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kodak v1003 screen has no data (grey screen)


The cost to repair is about the same as the cost to replace and you must send it back to Kodak for repairs. About 6 weeks turnaround.

Jul 14, 2017 | Kodak EasyShare V1003 Digital Camera

2 Answers

Hello, Kodak easyshare P712 Camera keeps turning itself on/off when it is in the " on " selection. Battery is fully charged. Started doing it 3 weeks ago and it happens every 2 to 3 seconds. Has this...


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Sep 23, 2010 | Kodak EasyShare P712 Digital Camera

1 Answer

The LED screen on my Kodak EasyShare C633 Digital Camera is broken - no picture shows through - is there such a thing as replacing an LED screen?


Hello

Yes, you can certainly do this. Although i would rather suggest that you get this done by an professional.

You can take your camera to your nearest camera repair shop, they will be able to replace the screen for under $40.

Hope this can steer you in the right direction. Please do not hesitate to let me know if you need any further assistance.

Kind regards
Andrea

Sep 15, 2010 | Kodak EasyShare C633 Digital Camera

1 Answer

I have a kodak easy share c633 and even though I put good batteries in the scope will not come out to take pictures. What can I do? Thanks


Hello

The problem is that the lens has become stuck in the barrel after dropping it. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful.

Regards
Andrea

Aug 21, 2010 | Kodak EasyShare C633 Digital Camera

1 Answer

I have a Canon PowerShot S5 IS, and a few months ago I started getting a lense error whenever I went into phototaking mode. Every once-in-a-while when I went into the "view pictures" mode, the lense would...


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Aug 12, 2010 | Canon PowerShot S5 IS Digital Camera

2 Answers

Lost software CD for Kodak easyshare C633!


follow the link and select your windows version.
http://wwwcaen.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?pq-path=10/3905/6839/9637/9640&product=EKN032552

Oct 18, 2009 | Kodak EasyShare C633 Digital Camera

Not finding what you are looking for?
Kodak EasyShare  C633 Digital Camera Logo

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Computer Links

Level 3 Expert

2386 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...