I received a new i880, today. The screen lit when it was first turned on but it showed "no signal." After turning the phone off and back on a few times the screen went black. After hours of reading, calling customer service and charging the battery, I cannot get a lit screen. Anyone have any suggestions?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds like you need a new LCD Screen(is the screen a little lit up or completely blank) If completely blank than most likely the LCD needs to be replaced if it appears to be slightly lit up than most likely it is a software related issue.
Your TV is not receiving or displaying the signal from your DIRECTV® Receiver.
Your receiver has correct guide information, but is not processing video correctly.
You are viewing a channel where an upcoming sporting or special event is scheduled or has recently ended.
Turn TV off and on.
Make sure light on front panel of receiver is lit.
Press the "TV/DSS" button on the remote control or front panel of the receiver (not all receivers have this option).
Reset the receiver by unplugging the power cord for 15 seconds.
Check all cable connections between the dish, receiver and TV.
If the picture is black, but the program title and description display in a banner the top of the screen:
If the problem is only occurring on a few channels, check the detailed description of the program through the on–screen guide on those channels. Often, we display a blank screen with a banner before and after a high–profile event to alert customers about the event.
Reset the receiver by turning off and unplugging the power cord for 15 seconds.
Run a signal meter test to check your signal strength (press "menu" and look under "setup" or "installation").
If your signal strength is below 70 (or below 60 on HD receivers) in clear weather on transponders 1 and 2, see our troubleshooting steps for "Searching for satellite signal. Please stand by." You may see zero strength on transponders 4, 12, 18, 20, 26 and 28. This is normal in many areas. Your system manual shows how to run cables and point your dish.
Thank you for writing in regard to your screen display as it shows as a blank one. Let me help you with this.
There might be a damage on the Flex Cable of your phone already. The best thing that you can do is to bring your phone to the nearest service center and let them replace it. It is delicate on your part to change the Flex cable on your own as it requires an expert to replace that. Flex cable migt be costly. But, it will fix your phones problem.
Hope I was able to answer your query. Dont hesitate contacting us back.