Question about Kenmore 22822 Canister Vacuum

1 Answer

The power head on my kenmore 22822 Canister Vacuum won't work? the power upholstery head works fine.

Posted by on

  • 2 more comments 
  • Anonymous Nov 04, 2008

    i have the same thing it will work then not..kinda like a short..but everything else is working...

  • canam2502002 Nov 05, 2008

    Power brush will work on the carpets fine when I turn the setting to the floor there is zero suction

























  • Anonymous Nov 29, 2008

    My whisperbelt has what I would call a short in it. It will work then not, then work again.

  • mgray234 Jan 09, 2009

    The vacuum works fine right down to the light on the wand. From there it "seems" as if no power is getting to the power head. The upholstry head works fine and I have depressed the reset button on the power head multiple times.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Filmmaker:

    Uploaded 5 video answers.

  • Expert
  • 152 Answers

I have the kenmore whisper belt and i have a reset button on mine

Posted on Jan 06, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Should I replace the vacuum hose or simply shorten it if a hole developed near the vacuum canister base? What are the disadvantages of this? For now I am doing duct tape, which is not so elegant as dust...


You can just shorten it as long as there is not a underlying power supply in the hose itself. after you shorten it use a "hose clamp" to hold the shorten hose in place. :)

Sep 21, 2010 | Kenmore 22822 Canister Vacuum

1 Answer

Kenmore Powermate power head not working


I've got the same problem. Try checking out the electrical connection where the hose attaches to the canister. The hot male terminal is corroded and the female socket is burned out. Its an unfortunate design flaw that every time you open the vacuum to replace the bag the electrical connection disconnects and reconnects. Not sure if I can find replacement parts for a 10 year old vacuum or if a home-made re-wiring job is in order. Will find out tomorrow.

May 30, 2010 | Kenmore 23612 Progressive PowerMate Bagged...

1 Answer

Kenmore canister vacuum cleaner won't start


Hello,

The rigidity of the Power Head/Handle is quite durable, :) but sometimes they give out. Have SEARS ...loL, sears, have Sears have a look at the head. :)

Apr 03, 2010 | Kenmore Vacuums

1 Answer

Vacuum not picking up dirt


The neck in your power head is likely clogged. Disconnect from the wand and look inside. Also check the wand.Since you have suction on the bare floor the hose is likely not blocked.

Sep 11, 2009 | Kenmore 22512 Bagged Canister Vacuum

1 Answer

Central vacuum power head no work


Looks like a Beam central vacuum www.beamvac.com, and a Kenmore vacuum head.

Reply what problems you are experiencing and I will try to help.

Jan 23, 2009 | Vacuums

1 Answer

Power Head doesn't work


Are you talking about the large power head (ised for floors) or the smaller power head (for upholstery)?

If you are talking about the large one the first thing I would check is the belt (accessed by turning the tiny lock knob on the bottom with a flathead screwdriver).

If the belt looks ok the next thing I would check is make sure an accumulation of hair hasn't built up on the ends of the roller....take the roller out and turn the roller by hand holding onto one of the ends...it shoudl move freely....

Jan 13, 2009 | Rainbow E series Canister Wet/Dry Vacuum

1 Answer

Bad bearing on kenmore whisperbelt beater brush.


Sorry,
I thought this was a free forum. I do not intend to hire a bunch of experts to find out if a bearing can be found for my vacuum cleaner when the entire brush assembly in $39.99.
This is a very tricky way to get unsuspecting people sucked into paying for something they thought was free.
Bad business, sorry.

Dec 30, 2008 | Kenmore 22822 Canister Vacuum

1 Answer

Kenmore cannister vacuum tube - reattaching connectors


Make sure that the two prongs that go over the hose are going in the correct slot in the cuff. If in the wrong one, the cuff won't snap into place. I have had to slam the end of the hose on the work bench while holding the cuff to push it all of the way on. Some I have heard warm up the cuff in hot water or a hair dryer to make it more pliable.

Mar 27, 2008 | Kenmore 22822 Canister Vacuum

1 Answer

Kenmore canister hose


The part number for the hose is 4370993, you can go to sears.com, put int he part number and order it. You will only get just the hose, you have to take the ends off of the old one and put them on the new hose.

ec3d866.png

Mar 11, 2008 | Kenmore 22822 Canister Vacuum

Not finding what you are looking for?
Kenmore 22822 Canister Vacuum Logo

Related Topics:

431 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Chris Nomland
Chris Nomland

Level 2 Expert

115 Answers

yadayada
yadayada

Level 3 Expert

78919 Answers

Are you a Kenmore Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...