- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if you don't have the kind of charger that goes directly into the dock connector, the zen vision needs a 5V charger ( it happens to be compatible with the PSP charger). if you just plug it into a usb cord it will not charger. you may also need the little white adapter piece the goes into the dock connector. i know only one place that sells older creative zen accessories and repairs creative zen visions . if you have all of that: i assume you pressed the little reset button on the bottom, it may just be frozen? if that doesn't work and you are sure you're charging it right, your logic board is dead.
Hey guys, I've had the same problem for over 2 years. Guess what? I fixed it today!! It is indeed a hard drive issue. I recommend following a guide to disassemble your zen. (Remember, this is only if you dont have any other choice) When you disconnect your hard drive, plug it right back in there pushing hard on it to make sure it is connected completely. IF that does not work, this is the final resort.
I did this and it worked. Normally you arent supposed to ever do this to any kind of hard drive. But why not? since it is already broken. lightlyish hit it a few times, and take the end of a screw driver and stick it in the hole on the end of the hd and pry it loose a tad. you arent trying to pop it open, just givve it a little breathing room. Worked for me, normally it shouldnt. But no one seems to be sharing anything so hopefully this helps someone some time in the future.
push the reset button, and hold the power switch at the same time, when you release them it should give you a screen with the option to rebuild, reset, and erase. see if these options work, if not then you hav a problem with the drive in the player. In that case, if it is recognized by the computer, try running a chkdsk utility on it. Let me know ASAP. Best of luck dude :)
If that doesn't fix it trythe USB cable Screen Doesn’t come on anymore http://www.anythingbutipod.com/forum/showthread.php?t=18859 If your Zen V is dead, wont respond to anything, try this, plug it in to the computer, hold the power switch in the on position, THEN trigger the reset button, worked like a charm for mine, I had thought it a lost cause."
Zen V is dead "If your Zen V is dead, wont respond to anything, try this, plug it in to the computer, hold the power switch in the on position, THEN trigger the reset button, worked like a charm for mine, I had thought it a lost cause." Zen Vision:M Not Responding SOLUTION! to No Charge, Device Not Connected or Recognize http://www.anythingbutipod.com/forum/showthread.php?t=10960
After days and days of search.. I found this site:
where ship anyway in the world the replacement screen for the zen vision m...