Bush lcd tv..no power - Bush 5693D 24" TV

Free bush tv software update downloads Try this link to download the firmware. You can get it from the authorized service centre for Bush too. http://electronicshelponline.blogspot.com/

Check all electrolitic capacitors at power supply area : better replace them.

have you looked at power supply as you might have to change the caps on the power supply

You can probably replace the TV for less than the cost of parts. Sounds like it needs a new board.

Click the link below :----http://wikisolutions.blogspot.in/2012/02/get-free-answers.html

You could get one from ebay , but they seem very expensive. http://cgi.ebay.co.uk/24V-AC-power-adapter-Bush-1LCD23TV022-LCD-TV-/360224352429?pt=Televisions&hash=item53df0b68ad#ht_2521wt_1094 (It does say make an offer)
Other models may use the same supply and its cheaper, You could check with the vendor if a cheaper one is suitable for the Bush, after all why pay more for the same thing. http://cgi.ebay.com.sg/24V-AC-power-supply-adapter-BenQ-FP231W-Q23W3-LCD-TV-/330393378073 You just need to make sure the current/wattage and the plug on the end are the same.

If the TV has no power at all, not even the led light on, and does not respond to remote or button, then the most common is a faulty power board inside the tv.

I've brought a 32"bush lcd tv from Argos yesterday and the picture went off but the sound never
Tried turning it off but no change what is the problem

yellow screen