Lay the TV, face down on a folded towel. Remove all the screws. Note: there is one perimeter screw with machine threads; all the others are the same.




Remove the four black screws from this area:



Then you can pop the back loose and slide it towards the end where the black screws were. It just lifts off and there are no wires attached.




Now you can see the DVD player. I used the end of a plastic pen to shove against the edge of the DVD that you can see through this slot.



Press on the DVD's edge until you see it come out the entry slot.



You can see the DVD slide out the entry slot as you are pushing.

When done, slide the back into place and replace the screws.