Question about Kenwood KDC-X591 CD Player

3 Answers

KDC-X591 Demo Mode & Remote Steering Harness

I installed the KDC-X591 into my explorer and cannot get it out of demo mode. I follow the instructions in the manual and it never comes up with "DEMO ON" or "DEMO OFF" in the display.

Also, in the manual it says you can purchase a steering remote control adapter. I can't find one on the normal sites.

Thanks.

Posted by on

  • 1 more comment 
  • Anonymous Jan 07, 2008

    CANNOT TURN OFF DEMO MODE, AND NO AUDION UNABLE TO FIND PROCEDURE FOR INTERAL AMP ENABLE.

  • LKD123 Jan 09, 2008

    Selected Demo display

    pressed control knob and was switched to standby mode

    I tried moving the control knob right left up down

  • Anonymous Jan 27, 2008

    same exact problem

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Instructions i was trying to figure out the same thing in my brothers car and i came to this site the two answers before mine were both right and wrong, they needed to be combined and modified a tic. but i just got my brothers kdc x591 and this is how hit source button till standby mode is on, press menu then use the control knob the right one thats not the volume, to select demo mode press the 1 button then menu and voila

Posted on Aug 16, 2009

Ad

This is part of the menu system. I think that you enter standby and then push the menu and it will give you the option to shut off demo.

Posted on Feb 05, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Push you SRC button until it show "stand by" then move the control know (the one at the right) up an down until you find "DEMO" then hold the control down o up for two seconds and tada ! it will swith to DEMO OFF

Posted on Jan 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenwood w-3537 how to turn off demo mode


To turn off the Demo mode you need to:

Press source button, then select stand by mode.

Using the FM/AM button select Demo display

To set the demo mode hold the source button for 2 seconds
it will switch from on and off.

If this doesn't help I have included a link of the manual, it's on page 25.

http://www.kenwood-electronics.co.uk/WebFiles/File/uk/download/Instruction%20Manuals/KDC/KDC-W3037_W3537_W4037.pdf

Jan 09, 2011 | Kenwood Car Audio & Video

1 Answer

Kenwood excelon kdc-x589 demo mode makes me mad


CLICK HERE for your owners manual in PDF format.

Cancelling the DEMO MODE is explained on page 29... as follows....

Select the Demonstration mode
Push the Control knob to [FM] or [AM].
Select the "DEMO" display.


Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Each time the knob is pressed at least 2 seconds,
the Demonstration mode switches "on" or "off"


Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

May 21, 2009 | Kenwood KDC-X589 CD Player

1 Answer

The function DEMO MODE canĀ“t be set off. I want to set any wall paper and the DEMO MODE stay ON.


CLICK HERE for a PDF version of your manual.

To turn OFF DEMO mode - go to page 50 of the manual.... and find the following-

1 Select the Demonstration mode
Push the Control knob to [FM] or [AM].
Select the "DEMO Mode" display.

2 Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Each time the knob is pressed at least 2 seconds,
the Demonstration mode switches as shown
below.

Demo Mode "ON"
Demo Mode "OFF"

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Apr 10, 2009 | Kenwood KDC-MP7028 CD Player

1 Answer

Kenwood kdc mp235 cant get it out of demo mode


you have to be in standby mode, thats the key, i had the same problem, just go to "demo on" and change it to "demo off"

Sep 11, 2008 | Kenwood KDC-MP235 CD Player

1 Answer

How to turn demo off kdc-mp3035


1. Be sure the unit is in the stand-by mode (ie: turned off)
2. Push the control knob towards FM or AM. Select the DEMO display
3. To set the DEMO mode, do this:
Press the control knob for at least 2 seconds. The demonstration mode alternates between DEMO ON and DEMO OFF.

Although it doesn't say, i would imagine you need to press the MENU button to exit this screen.

This information came from the instruction manual that I was able to download from the internet. Shoot me an e-mail and I'll forward it off to you.

Mar 09, 2008 | Kenwood KDC-MP3035 CD Player

2 Answers

KENWOOD KDC-W6537U


Hi there

You can get the instruction book from here

http://www.kenwood-electronics.co.uk/WebFiles/File/uk/download/Instruction%20Manuals/KDC/KDC-W6537U.pdf

Page 29 tells you how to turn off Demonstration mode. Blue toothe operation is well detailed also. Good luck. Any problems, I have downloaded the manual to help you. :)

regards
Graeme.

Feb 14, 2008 | Kenwood KDC-MP4032 CD Player

1 Answer

Kenwood KDC-MP635 STUCK IN DEMO MODE


Turn the unit onto standby then press and hold the menu button then scroll down to demo using the toggle switch on the right then press and hold the toggle switch for a few seconds and it will change to demo off. It's not too difficult but you are correct, it doesn't tell you correctly in the installation instructions.

Jan 25, 2008 | Kenwood KDC-MP635 CD Player

3 Answers

Demo Mode will not switch


I had this same problem, you have to be in menu mode to turn off DEMO mode.

Sep 01, 2007 | Kenwood KDC-MP205 CD Player

1 Answer

Demo mode problem


From the user's manual (pg.23): 1. Select the Demonstration Mode. Push the Control knob towards [FM] or [AM]. Select the "DEMO" display. 2. Set the Demonstration Mode. Press the Control knob for at least 2 seconds.

Feb 13, 2007 | Kenwood KDC-MP232 CD Player

Not finding what you are looking for?
Kenwood KDC-X591 CD Player Logo

Related Topics:

346 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4930 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

78936 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...