Question about HP Photosmart C6180 All-In-One InkJet Printer

1 Answer

Printer isn't getting my jobs since resetting of my router

I recently had to reset my router due to a power outage and ever since I cannot get anything to print. The print jobs are in the print queue but the printer isn't getting them. It says error on the first print job. I've turned the printer off several times and still nothing. Tried tech support and was disconnected from chat.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 20 times.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 16 Answers
Re: printer isn't getting my jobs since resetting of my...

If you reset your router, the IP address of your printer must be on default when the router is down, so you need to set the IP address of your printer again, to do this you must go to SETUP, then NETWORK, then IP SETTINGS, then MANUAL.
OR you can also choose NETWORK SETUP WIZARD.

Post here if you have other question. thanks

Posted on Jan 05, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I reset Z6100 maintenance counter?

POwer off the printer and then depress the Maintenance button now Power On the printer till it resets which is for few seconds

Jun 25, 2015 | HP Designjet Z6100 InkJet Printer

2 Answers

Printer will not print or copy.......all ink cartridges are fine....just stopped printing

Sounds like it lost connection to the wireless router. I believe the manual calls for unplugging the unit for 2-3 minutes and then plugging it back in and powering up. The unit should reset and the blue wireless button should be back on. I would go to the task bar and pull up the printer and highlight any jobs still listed an cancel any print jobs still in the que and then try to print again.

Jan 20, 2011 | HP Officejet 6500 Wireless All-in-One...

1 Answer

Lost ip/connection on Dell 1720dn

try resetting the "print spooler"
  1. start
  2. control panel
  3. admin. tools
  4. computer management
  5. services and applications
  6. services
  7. scroll down till you see "print spooler"
  8. left click once
  9. "restart"

Jan 06, 2010 | Dell 1720dn Laser Printer

2 Answers

Getting a c6400 on my cs2550 copystar this all happened after a power outage

reset it with... 10871087 then type 906... press start then reset then start

Dec 10, 2009 | Copystar CS-2550 All-In-One Printer

1 Answer

I have an HP c7180 all in one inkjet printer and recently we had a power outage. Ever since that time the colors are all mixed up. After the power outage, I was getting this error message: ""Ink System has...

If your product is in warranty then I recommend you to contact HP support to service or replace the unit. Otherwise perform the steps given below and verify the results.

  1. Turn on the unit.
  2. Disconnect the power cord from the back of the unit.
  3. Press and hold the # and 7 buttons simultaneously.
  4. While still holding down the # and 3 buttons, connect the power cord to the back of the unit.
  5. Continue holding the buttons until the Power button blinks.
  6. Follow the instructions that display on the unit to select the language settings.

Oct 13, 2009 | HP Photosmart C7180 All-In-One InkJet...

2 Answers

I am getting an error C6000 on my Kyocera KM-1820 after we had a power outage. I can't seem to get it to turn off. What do I need to do in order to get the copier to work again and for it not to have the...

Go into the service mode ( 10871087 ) then enter 163 then hit the start button. This clears the C6000 (heater error) and if it is a false code due to a power outage, it will clear the code and resume normal operation. If the code comes back, you likely have a bad heater lamp or thermal fuse or thermistor.

Aug 19, 2009 | Kyocera Copystar CS-1820 Black and White...

1 Answer

Printer will not powerup.

its seems the power supply unit of the printer is having problem plz send it for servicing.

Dec 28, 2008 | Canon PIXMA MX850 multifunction InkJet...

2 Answers

How to correct error message sram error missing E?

Hate to say this but most likely the Print Engine Control Board has failed.

May 09, 2007 | Xerox Phaser 7300DN Laser Printer

Not finding what you are looking for?
HP Photosmart C6180 All-In-One InkJet Printer Logo

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts


Level 3 Expert

93861 Answers


Level 3 Expert

7983 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides