Question about Tascam Quantegy 120 Minute Digital Audio Master for DA-88

2 Answers

Tascam DM-24 Digital Mixer Problem

I purchased a used Tascam DM-24 mixer, but it keeps locking up and giving me a "NaN error on DSP .... this is Fatal Error please reboot".
It happens mostly when powering up, but occures during normal operation as well. Any help would be appreciated.
-- Thanks.. Dan Copher

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

This mixer is plagued by bad caps in the powersupply. Open the desk. Find the powersupply and change the caps... (big black round capacitors. If the silver heads are a bit round they are failing. They should be dead on flat.

Posted on Jul 31, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I purchased a used Tascam DM-24 mixer about 2 years ago, and it 's been running great. Just about 2 months, it frequently shut itself off with a message:
" Power Supply voltage (+5V) is too low for stable operation. Please restart DM-24".
Of course, many attempts of restarting the board, but it won't turn back on after several hours later, and only lasts about half a day work only. Very frustrating. Any idea I could get help or fixed? million thanks for suggestions. Brian

Posted on Jan 13, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is this error message mean, MIDI File Dump Error !-> F3???


It can be a Spam or scam I asked you to for help to get yourself an expert to fix this

Apr 06, 2015 | Tascam DM-3200 Digital Mixer

1 Answer

I have a mixer tascam tm-d4000 and stopped working now screen shows "fatal error" can you tell me how to fix it please


Do you have the service manual and the necessary tools and experience? If not take it to a service shop it will be more cost effective.

Jan 28, 2015 | Tascam Audio Players & Recorders

1 Answer

Hi I have a tascam tm-d4000 it stopped working now shows on the screen "fatal error"


Usually, this is a symptom of a main board failure. Sometimes rebooting the mixer will temporarily stop the error. If there are any additional numbers (like 99-00000009-00) in the error message, you can try resetting the unit. Press and hold Shift and Mixer Position and then turn on the Mixer. The unit will need to be professionally serviced or replaced. Since it is a discontinued model, check your warranty. It may be cheaper to replace the mixer.

I wish that I had better news for you.

Cindy Wells

Jan 28, 2015 | Office Equipment & Supplies

1 Answer

How do I hook up my tascam fw1082 to a mixing board?


Hi, There are two ways you can connect it up. You have a TRS (Tip Ring Sleeve) monitor output that could be patched into the inputs of any analog mixer, balanced high level inputs.
You also have a S/PDIF stereo out. If a digital mixer doesn't accept S/PDIF you can get a converter to change S/PDIF to an AES, which any pro digital mixer will work with. I think HOSA has one for about $60.00, you might find something on Ebay as well.
Here is a Link to the TASCAM Spec page for you FW-1082

http://tascam.com/product/fw-1082/specifications/

I hope this helps,
Best Regards,
Mark

Jan 26, 2011 | Tascam Audio Players & Recorders

1 Answer

I HAVE A TASCAM DIGITAL MIXER TYPE DM-4800. I NEED IT TO CONTROL MY TASCAM HARD DISC RECORDER TYPE X-48. I NEED CABLE CONNECTION AND SETUP INFORMATION


http://www.manualnguide.com/download/manual-guide/tascam-dm-24-digital-mixer-automation-manual.html
setup information in manual above-i think cable will be found in a music equipment store near you.

Jul 18, 2008 | Tascam Audio Players & Recorders

Not finding what you are looking for?
Electronics - Others Logo

2,153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tascam Electronics - Others Experts

Glenn Mayer
Glenn Mayer

Level 2 Expert

91 Answers

Ben Armstrong

Level 2 Expert

357 Answers

Computer Links

Level 3 Expert

2386 Answers

Are you a Tascam Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...