Question about Nikon COOLPRINT Thermal Printer

1 Answer

Low memory on HP Laserjet 3050

I am getting a low memory error on my HP Laserjet 3050, how do I reset?

Posted by on

1 Answer

Re: low memory on HP Laserjet 3050

Low memory error on my hp laserjet 3050

can anyone help

Posted on Jan 12, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

49 error on HP laserjet 3050

Internal Embedded Software Error. Manual says to power off for 30 seconds. Power it on and let it initialize. If the error persists you will need a tech.

Aug 15, 2011 | HP LaserJet 3050 All-In-One Printer

1 Answer


Press cancel on the printer and print something else.
Whatever you were trying to print is sucking all the memory resources from the printer.

Feb 18, 2011 | HP LaserJet 3050 All-In-One Printer

2 Answers

I am getting "memory is low/ insufficient memory" in my hp laserjet M2727 printer. what should I do?

The internal memory is full try a nvram.

1. Turn the printer off
2. Hold down the right arrow and the cancel button
3. Reboot the printer while holding the buttons and hold until permanent storage is displayed. Let go of the buttons and wait for the ready message on the display.

This reset will clear all of your saved settings and contacts, if networked print out a configuration report after resetting the printer to view the ip address (IPV4). If the IP address has changed you will need to update the print driver's port tab and update the port.


May 21, 2010 | HP LaserJet 3050 All-In-One Printer

2 Answers

I want to know how to clean up memory on the

Your printer shouldn't be holding any data in RAM, but if you want to make sure, unplug it from electrical source for 30 seconds and then plug it back in. It will reset itself and be ready to go.

Sep 11, 2009 | HP LaserJet 3050 All-In-One Printer

1 Answer

Low memory

We are getting the low memory message on the printer...what do we need to do

May 29, 2008 | HP LaserJet 3050 All-In-One Printer

9 Answers

Low memory display on HP Laser Jet 3050

Hello All,

Please perform the following:
Super NVRAM init
When a super NVRAM init is performed, the all-in-one language and telecom country/region settings
are undefined. The user is prompted to set the language and telecom country/region. Until these settings
are defined, the all-in-one will not return to the Ready state.
CAUTION A Super NVRAM init erases all data that is stored in both the unprotected and
protected NVRAM memory.
To perform a super NVRAM init
Turn off the all-in-one.
2. Press and hold down the * and 5 buttons.
3. Continue to hold down the buttons while you turn on the all-in-one. Hold the buttons throughout
the entire power-on sequence.
4. When Permanent Storage Init. appears on the control-panel display, release the buttons.
5. When prompted, set the language and telecom country/region.
6. Allow the all-in-one to return to Ready before using it.

Mar 10, 2008 | HP LaserJet 3050 All-In-One Printer

Not finding what you are looking for?
Printers & Copiers Logo

1,226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Printers & Copiers Experts


Level 3 Expert

94198 Answers


Level 2 Expert

246 Answers

Ric Donato

Level 2 Expert

201 Answers

Are you a Nikon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides