Question about Samsung HP-R4262 42 in. Plasma Television

2 Answers

TV Has No Picture - Samsung BE40PSNB

We have a 42in Samsung that just lost picture and will not come back. We have tried several other connection types all verified to be working. he on-screen menu does NOT show and the TV will occasionally turn off when the menu button is pressed. The only this it seems to do is turn on, tint the screen dark blue and produce heat. While an extra heater is nice in the winter, being able to watch TV is preferred. Any help or suggestions are appreciated.

Thank You

Posted by on

2 Answers

Re: TV Has No Picture - Samsung BE40PSNB - Samsung HP-R4262 42 in. Plasma Television Flat Panel Televisions

Check c1853, c1854, and cb850

Posted on Jun 26, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 579 Answers
Re: TV Has No Picture - Samsung BE40PSNB

If it isn't in warranty, start by trying to email Samsung about your heater here:

Posted on Dec 31, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Humaxhb-1000s will not connect to tv

have you tried it on another tv?

Aug 31, 2014 | Flat Panel Televisions

1 Answer

LCD Samsung tv no picture no sound

Try to unplug set and a box if used from power for several minutes and then power back to see if a reboot will help or not.

Dec 10, 2012 | Flat Panel Televisions

1 Answer

Tv got picture but no sound tried all connections all ok

Hi sound like digital board gone.There is another possibility of bad connection or lost connection between main board and digital board.Hope that helps.

Sep 15, 2012 | Samsung Flat Panel Televisions

1 Answer

Rca 42in full hd lcd picture flickers

If the picture on your TV flickers, there may be a simple fix. Here are some possible answers and suggested solutions:

1. Your set-top box may need a simple reboot. Unplug the power connection to the set-top box for about 30 seconds. Reconnect the power and turn the set-top box back on.

2. Check all of your cables for a loose connection by tightening each one with your fingers.Flickers can sometimes be caused by bends in rigid cables, too.

3. If your picture flickers to a black or blue screen, you could have a bad set-top box. Contact your cable or satellite service provider about installing a new one.

4. If you still have audio, the flickering could also mean that you have a failing backlight.

For additional troubleshooting information, check out the chart at TV flickering for more solutions. I hope this helps!

Sep 14, 2012 | RCA Flat Panel Televisions

2 Answers

My samsung plasma has a cracked screen lost picture can this be fixed


you must replace the screen to have the picture back.

Good luck.

Jan 05, 2012 | Flat Panel Televisions

1 Answer

I just bought my 42in last night and I attached my cable box to it, with a normal black coaxal cable and the red/white/yellow hookups. The only problem i have is the picture looks kind of grainy and...

Cable box have HDMI port,hook it up on a HDMI cable to the tv,will improve picture quality greatly.Tries HDMI cable to hook up the PS3 system and go in setup changes to HDMI setup will get HD format picture,will be very clear no more grainy and inconsistanty.

Feb 17, 2011 | Sansui HDLCD-4212 LCD TV

1 Answer

My 42in Vizio LCD has sound but no picture. Screen starts blue when it turns on then goes to black with only sound.

Make sure in the back of the TV the "picture cords" or A/V cables are properly fitted.... Hope this helps :)

Jan 08, 2011 | Vizio 42 in. LCD TV

1 Answer

Mdl # pn50a5601f when the remote button is pressed to turn on the tv it responds with no picture. The tv clicks twice and turns off. it will operate by it self trying to turn on approx. 8 times without a...

Try several inputs. See if you have the sam result. If you are watching with an antenna make sure all is connected and setup is set up.

Try set up for the TV with its' remote.If it works on the blank screen that means an input problem.

Mar 24, 2010 | Samsung PN50A650 49.96 in. Plasma HDTV

1 Answer

I have a 42in plasma samsung and somehow have sound but not picture, need help. Thanks!

This can be from the power supply, main processor, screen drive, or the screen itself.

The modules must be tried to determine the defective one.

Jerry G.

May 21, 2008 | Samsung HP-R5052 50 in. Plasma HDTV

Not finding what you are looking for?
Samsung HP-R4262 42 in. Plasma Television Logo

Related Topics:

718 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Flat Panel Televisions Experts

xxxxxx xxx

Level 3 Expert

4679 Answers

Steve McIntosh

Level 1 Expert

11 Answers

Steven Wander
Steven Wander

Level 3 Expert

574 Answers

Are you a Samsung Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides