Question about Fisher and Paykel GWL11 Top Load Washer

1 Answer

Washing machine The washer starts fine but after 4 min shuts off . Then you have to unplug it for 10 min and start over. It runs fine again till it spins then you have to repet same steps 4 more times.

Posted by on

  • Anonymous Jan 07, 2008

    I'm having the same problem with my GWL10 (US) machine. The machine will start running and then just shut completely down.

    A repair man said (for $75) the control pannel needs to be replaced at a cost of $260.

    Now this is going to cost me $335 to fix this machine, but for how long?? At that price, I'll get a new one for a bit more.

    Can't locate a control pannel for this unit on the web.

    Any other ideas??

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 125 Answers

Check to see if the pump is leaking, check it in the middle of a cycle you may see water or even suds. if so replace the pump.. before it blows the control board.

Posted on Jan 12, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wash machine quits mid cycle


Your Circuit Control Board is starting to Fail.... The Electrical Reset is the give away....

Mar 03, 2014 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Bike leaves me stranded after 15 mins


Check your ignition coils. Sometimes they fail with an open circuit, this can sometimes close up when the machine is cold and open again when it heats up. So. it will start when cold and fail when it warms up.

Apr 24, 2013 | 1982 Yamaha XJ 650

1 Answer

Kenmore series 90 washer runs for a short period and then stops


Hello,

Sorry to be the bearer of bad news but what your describing is a classis sign of a bad motor. When the motor is bad it will run will its cool...when it heats up it shuts off and will restart for a short time when colled off till once again hot and shuts off again.


GENE

Oct 29, 2011 | Washing Machines

1 Answer

Dryer noise sounds like bearing out or a roller is bad model # 417-98702891


my dryer makes a funny noise about 10 to 15 min. into cycle. then shuts off. if you try to restart will not restart unless you hold start button down. once you let go will stop. wait about an hour and dryer will run for another 10- 15 min and start process over again.

Feb 22, 2010 | Kenmore 98702 Stacked Washer/Dryer

1 Answer

Frigidaire top load washer that keeps shutting off


i canty be 100 percent sure
without the model
but it sounds like you motor is trying to start but for whatever reason is cutting out on the overload. Meaning it gets hot,,,and shutsd it self off to save it self
ther ecould be alot of reasons for this,,, far to many to type here,,,
with frigidaire it could be a bad motor capacitor, or a bad start winding on the motor.......
or a simple as a sock between the tubs preventing the tub from truning
sorry i cant be more help
but figured you should have some sort of answer to at least5 investigate

Oct 28, 2009 | Washing Machines

1 Answer

Machine starts to spin out then the motor shuts off and it takes a minute or so to be able to start it again


sounds as if your motor is over heating.. restarts after 10-20 mins or so??? soundslike abad motor to me

Mar 23, 2009 | Amana NAV3330AW Top Load Washer

1 Answer

Washer won't run through a complete cycle-stops at 29 minutes


There is a service manual behind the control panel it will show you how to test the door locks. If might have a bad lock solenoid.

Aug 01, 2008 | Maytag Neptune FAV6800AW Top Load Washer

Not finding what you are looking for?
Fisher and Paykel GWL11 Top Load Washer Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

michael_t919

Level 2 Expert

88 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...