Question about KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

1 Answer

Diswasher stopped working

Our Kitchenaid dishwasher is only 2 years old and has worked fine since install. Christmas day we did a load of dishes, that same afternoon we loaded it again, but when we pushed on the "normal" cycle, the light did not come on. We pushed start, and nothing happened, and tryed the reset button.
Still nothing works. We checked power to the unit, and it has power up to the control panel.
Can you please help?

Posted by on

  • 8 more comments 
  • Illni83 Dec 31, 2007

    I've got the same problem on a unit that is a couple of years older. I noticed there is a "crack" in the plastic covering over the top of the "start" button on the control panel. I'm guessing that water may have penetrated the control electronics in the door and shorted it out. 

  • johnnyboyboy Feb 16, 2008

    stopped during cycle, has water thats standing in the bottom. does not reset and no power.

  • ogmfme Feb 19, 2008

    Went to start washer and nothing lights up!! Power and water to washer fine. Please help

  • Ramneek Randhawa Aug 11, 2008

    I have May Tag dishwasher which stopped working. No setting light come on. It looks like a fuse but I do not wher is the fuse.

  • REF70 Aug 26, 2008

    We just moved into a new home and the kitcheaid dishwasher just stopped working. Model #KUDS03FTSS3. We have checked the power tried to reset to no avail.

    DRF NC

  • Anonymous Nov 17, 2008

    Do I need to turn off power supply to dw t o replace the fuse harness?
    I don't know that breaker and since it is not working can't tell.
    have replaced fuse w/o harness now this time I will.
    But where is the power shut off on the unit?

  • JimWelch Dec 27, 2008

    I have a similar problem. I select the desired cycle and press start but nothing happens.

  • thorm Jan 01, 2009

    can someone tell me where the fuse is on the kitchenaid dishwaser

  • 1234jjbig Apr 17, 2009

    Hi Can you talk me through the fuse replacement?

  • Anonymous Mar 17, 2014

    I can "reset" the dishwasher by turning it "off" at control panel and then turn "on" while depressing "start" and it will usually work - sometimes for the one load, sometimes for several loads before having to be "reset" again. Sometimes I can change panel settings if I experiment enough with various combinations of holding buttons while turning the power on/off. So my question is, "Do I need a new control panel or do I need a new circuit board/timer, or both?"



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,314 Answers

There is a fuse in the washer that needs to be replaced reply to me and will walk you through it

Posted on Jan 01, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My kitchenaid diswasher will fill and drain with water but when the wash cycle starts there is a buzzing sound and nothing happens. Model 310253306 about 13 years old. The was cycle not working was not a...

The buzzing sound would be the motor trying to start and it not being able to turn...
either something is stuck in the pump and holding it from not starting or the motor its self has gone bad and will not start.


Apr 23, 2011 | KitchenAid Dishwashers

1 Answer

Brand New Bosch Stopped Working On First Use

need to make sure no breakers have tripped if not then replace operating thermostat. if it is only a few days old you should be able to get the dealer to cover service call and labor

Jun 21, 2009 | Bosch Evolution 500 SHE45M05UC Stainless...

1 Answer

Brand New Bosch Stopped Working On First Use

No question that it is a warranty problem, you shouldn't consider doing anything on the machine yourself at this point.
After the warranty is dead and it fails, c'mon back and you will likely find someone to help. It is good though, that we are forewarned about Bosch-

Jun 21, 2009 | KitchenAid KUDK03ITBK Built-in Dishwasher

1 Answer

Diswasher stopped working

There is a thermal fuse on the controller that commonly goes out. If you take apart the panel, and see the computer part, there is usually a part clipped on the side with 2 wires on it. When that goes out, it acts like there is no power to the unit. Very easy and in-exspensive to replace if that's it. It's pretty common on those. Good luck

Feb 15, 2009 | Dishwashers

3 Answers

Dishwasher problems

No water heater problem. Make sure you are using rinse aid formula and back off the soap to 1/2 of what you were using.

Jan 05, 2008 | KitchenAid 24 in. KUDI01TJ - Multiple...

1 Answer

My Energy Star/Built-in

Me to....My dishwasher is about 7 months old. It use to be extremely quiet. Now it is LOUD. but still works fine. HELP!

Oct 18, 2007 | KitchenAid 24 in. KUDI01ILBS Stainless...

Not finding what you are looking for?
KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher Logo

737 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Carmen Mikulic

Level 2 Expert

415 Answers


Level 3 Expert

4356 Answers

Are you a KitchenAid Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides