drum seems to make a lot of noise when spinning. What should I do? Might it be a drum bearing that is going? How to I replace it? What tools do I need? Any idea's on cost and time to do the job? A short video of the steps involve would be fantastic!
remove screws from front panel,this will let you remove top cover then you can access the drum belt and remove this, then manually rotate drum by hand,i bet you will find that the drum glides/rollers in the front side of the drum are your noise makers,not the rear center bearing
how to fit a new belt on a beco wma10w washing.ive fitted the belt 5 times now and it comes off...
(More)
how to fit a new belt on a beco wma10w washing.ive fitted the belt 5 times now and it comes off every time any ideas .ive tried warming the belt up and fitting it even brought 2 belts and neither will stay on .
Toward the end of the wash cycle, my whirlpool cabrio has started making a very loud crackling...
(More)
Toward the end of the wash cycle, my whirlpool cabrio has started making a very loud crackling noise. As if the machine was making popcorn. Is this a quick and easy fix? Or am I looking at a bigger issue?