Question about Microsoft Office Professional 2007 Full Version for PC

3 Answers

Printing position of a picture

I am trying to create a cover for a booklet (finished size is 5-1/2" x 6-1/2", letter sz paper folded in half). The cover has print on one side only.
I want to place a picture on the front cover. I am printing two/pages/up per sheet in landscape mode so the finished printout shows two pages side by side in landscape, the cover front is on the right-hand side. Everything looks perfect on screen.
However, when I try to print it, my picture prints out over the top of the left-hand side (which is the back of my cover). I've tried all kinds of different wrapping settings but nothing works. How can I get this picture to stay in place? Thanks for your help!!!

Posted by on


3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am working in "the Print Shop" and doing a program/ booklet. The page automatically sets the outside edge with a 1/2 inch boarder can this me changed? to a smaller boarder?

Posted on Jan 09, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 265 Answers

We need to know what software you're using to be specific in answering you. Publisher would be the best software to handle the print job you're describing. Please reply, to let us know more specifically: what template (if any) you're using, what printer and how many pages your document has.

Posted on Dec 31, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 53 Answers

Heyo Chuckie,

Really depends on your printer. I am assuming you are using Word. When looking at your documents, go to FILE, PRINT, click on PROPERTIES and then LAYOUT tab. THere is BORDERLESS printing. If you have a laser printer it may not have a problem with this, if you have an inkjet, there are paper rollers in the print that need to hold the paper while printing. As a last resort, I would make a PDF of the doc and swing over to Kinkos or a printing shop and print it off there.

Good Luck.

Posted on Dec 31, 2007

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Printmaster half-fold printing on epson printer

Before printing you need to select the size and orientation and it's a good idea to look at the preview before printing. That saves a lot of paper.

Nov 19, 2017 | Epson Office Equipment & Supplies

1 Answer

Print a booklet with a cover

well would have to know the model the spec on the paper and do you have a finisher

Jan 30, 2014 | Konica Minolta bizhub Office Equipment &...

1 Answer

How can I print booklets?

One sheet booklets generally are two-sided printing jobs, accordion fold, gate fold or quarter or half fold styles. Determine which of these styles your's will be and make a "dummy"'s as simple as folding the paper according to its finished form and marking each of the panels with scaled type or pictures. By making the dummy, the layout will reveal itself when opened and flattened. You will most likely have to "flip" the pages and print each side at separate times unless your machine is a "duplex" type of printer. The "dummy" is the key to the puzzle. Simple as folding and unfolding the panels.

Jan 30, 2011 | Canon LASER SHOT LBP-2900 Printer

1 Answer

Konica Monolta c550. ignores trifold

the fold function is only available when the option finisher fs-608 is installed . here is the steps to make a trifold on a fs-608.
1 open a one page document it can only be 8.5x11 in size.
2 click file then print and pick the konica c550 in the printer name box. click properties.
3 in the output method select print leave the paper tray on auto leave the paper size on same as original click original size to indicate 8.5x11click on the radio dial to indicate portrait under original orientation.
4under the layout tab leave the following fields blank-combination,rotate 180,skip blank pages,binding margin and image shifton the right side of the layout screen leave print type as one sided and binding direction on auto.
5 under the finish tab leave paper arrangement at its default= prioritize arranging papers.make sure there is a check mark in the fold box and select trifold in the drop down menu.
6 click ok and go to the c550 to retrieve the document

Nov 05, 2009 | Panasonic DP-C264 Copier

3 Answers

What does saddle stapling mean?

Saddle stapling is making a book of pages by stapling the spine at the back of the document to keep many pages together.

Apr 28, 2009 | Canon imageRUNNER 2200

2 Answers

Need to print a half-fold card envelope with HP Photosmart C4480

I'm printing wedding invitation envelopes (or A6) and had to set both my C4480 and psc1315 to a regular size 8.5x11 letter size but changed my margins to reflect the smaller size for my envelope with the left side of the screen being the more narrow margin. After adjusting the top margin accordingly, I fed the envelopes, flap side down and straight into the printer and voila...envelope addresses are printed. Good luck. Blu

Feb 15, 2009 | HP Photosmart C4480 All-In-One InkJet...

1 Answer

Print Booklets with Konica Minolta Biz Hub C650 Printer

Select Print, and then "Properties"

Layout Tab - select Print Type: Booklet

Basic Tab - Select original size and then size of PAPER to be printed. 11x17 is standard 8.5x11 book when folded.

Finish Tab - select saddle stitch.

Thats it, easy as pie.

Jan 22, 2009 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Help Konica Minolta c351 mac user

One is that the fold and staple option only works on 8.5 x 11 sized paper, thus printing onto a 11x17 spread and then folding. If letter paper is not selected, that will grey it out.

Nov 03, 2008 | Konica Minolta bizhub C351 All-In-One...

1 Answer

Printing a booklet on WorkCentre 7345 , need help argent !!!

OK, same problem, I've gotten through the solution. I can print and have the first page and last page on one side of the large sheet and the two inside pages on the other side, so that is foldable into a booklet.
I start with a 4 page (US letter sized) document I wish to print as a booklet on tabloid paper.
In the (page layout or editing program's) print dialogue, I've said print all pages, set it at 1 page per sheet, then clicked the printer properties button to open the Xerox Workcenter 7345PS option dialogue.
In the Xerox dialog on the "Paper/Output" tab, selected the larger (Tabloid, 11x17" in my case) paper size, selected 2-Sided Print. Then I select the "Layout/Watermark" tab and clicked the Booklet Layout radio button, chose "Landscape" for the Page Layout Option. Note: I saved these settings as "Tabloid Booklet" by clicking the down-arrow to the right of "Driver Defaults" so that I could select them and not have to dial in every one of the settings whilst experimenting.

Apr 11, 2008 | Xerox Office Equipment & Supplies

1 Answer

How do i make a booklet?

Select BOOKLET function, found in SPECIAL FUNCTIONS. Select which size paper is required and then select FINISHER to select STAPLER and SADDLE-STITCH, then load your document into the document feeder. Select number of copies then press start button. All of this is only applicable if a Finisher and Auto-Doc Feeder is installed. Let me know if this helps?

Mar 14, 2008 | Canon imageRUNNER C3220 Color Copier

Not finding what you are looking for?
Microsoft Office Professional 2007 Full Version for PC Logo

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2970 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18420 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides