Question about Zenith DVT412 System

1 Answer

Zenith DVT412 System Not working at all

One day myslef left a DVD in the DVD player and it was running more 3 hrs in Pause mode, when we turned it off the next time and went to turn it back on the DVD will say READING but then it stops reading it and it never plays. Now we cant play any of our DVD's. can we just get a part to fix it? or to solve this problem, do we reset full system? if you say 'YES' then please tell the steps to slove this issue

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,139 Answers

Hello Nibas,

You may have damaged the laser diode or one of the biasing components, you will need to take this to the shop to have it repaired. This is due to the fact that the laser output has to bee measured and you don't have the equipment to do that. This is not a case of resetting the DVD player which on this unit only covers if the unit is in progressive scan mode (how to reset from progressive scan). I know this is not what you may have wanted to hear but it is the truth. In any event you will have to take this unit to a repair shop.

I hope this helps,
Thank you,
Shuttle83

Posted on Dec 31, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I purchased dvds from ebay and they will not play on my dvd player. Is there a way i can unlock or change the region on my Sony DVP-SR200P DVD Player? Please help!!!


Turn on the unit with the remote controller, Wait until "no disc" appears in the unit's display. Press the keys: PAUSE, 3, 1, 4, 1, 5, 9. And "CODE" will appear in the display. Press the number key that corresponds to the disc zone you want to play within the next 5 seconds:0: All regions / 1: Region#1 / 2: R#2/... and so on. Then, within 5 seconds, press: PAUSE, POWER... and voilà. If you don't have good results, disconnect the equipment and repeat.
Or
Put your player in standby mode and then enter: [[0] [ENTER] Default Default region code [1] [ENTER] or [UP] [ENTER] Region 1 [2] [ENTER] or [RIGHT] [ENTER] Region 2 [3] [ENTER] or [DOWN] [ENTER] Region 3 [4] [ENTER] or [LEFT] [ENTER] Region 4 [5] [ENTER] or [TITLE] [ENTER] Region 5 [6] [ENTER] or [DVDMENU] [ENTER] Region 6 [7] [ENTER] or [RETURN] [ENTER] Region 7 [8] [ENTER] or [DISPLAY] [ENTER] Region 8
Or
Put player into standby modes by pressing power button on remote control. Then press Title button. Press Clear button. Press Power button.
I found these codes for all the other DVP-SR series players, yours was not listed but I thought was worth a try.

Apr 14, 2010 | Sony DVP-SR200P DVD Player

Tip

Voulme unlock for A1000 and A3000 Sony Walkman


So here you have it free information on unlocking the volume to your NW-A1000 and NW-A3000 this will allow you to have the maximum volume level for you to fully enjoy this product.

1. Press HOLD to put the player in hold mode.
2. Hold down LINK and press in order UP, DOWN, OPTION, UP, DOWN, RIGHT, LEFT, RIGHT, LEFT, LEFT, PLAY/PAUSE, OPTION.
3. Press HOLD to turn hold off. You will now be in test mode.
4. Press RIGHT to display menu items
5. Press UP/DOWN until you get to “OTHERS”
6. Press RIGHT to display next menu.
7. Press UP/DOWN until you get to “SP SET”
8. Press PLAY/PAUSE, “ON/OFF” is displayed.
9. Press OPTION, “ON/OFF” will be selected.
10. Press PLAY/PAUSE and it will be entered.
11. Exit play mode by pressing and holding BACK for more than a few seconds, release, and then turn the player off.

N.B> this is manufactures default to the lower level to save your ears perhaps to prevent a law suit, however I use mine on this max level and I can still hear my Wife nagging me !!!

LOL

on Sep 23, 2009 | Sony NW-A1000 MP3 Player

1 Answer

No sound from zenith dvt412 stuck in bypass mode..how to override?


this is a protection circuit.
When bypass mode then it means that something in the power supply module has failed and the unit then goes into protection mode to protect the board components.
Your surround sound need service from a qualified tech. No other remedy.

Mar 24, 2010 | Zenith DVT412 System

1 Answer

Sound but no picture. Not progressive scan issue I think.


Have you tried swapping the scart lead ends around, this might work.

Mar 23, 2010 | Zenith DVT412 System

1 Answer

Can I make sony NS400D multizone and if not, what does it play...we got it secondhand..ngcosgrove@hotmail.com


on the rear of the player will be a region code plate with a picture of a globe and a number next to it.
Turn on the unit with the remote controller, Wait until "no disc" appears in the unit's display. Press the keys: PAUSE, 3, 1, 4, 1, 5, 9. And "CODE" will appear in the display. Press the number key that corresponds to the disc zone you want to play within the next 5 seconds:0: All regions / 1: Region#1 / 2: R#2/... and so on. Then, within 5 seconds, press: PAUSE, POWER... and voilà. If you don't have good results, disconnect the equipment and repeat.
Or
Put your player in standby mode and then enter: [[0] [ENTER] Default Default region code [1] [ENTER] or [UP] [ENTER] Region 1 [2] [ENTER] or [RIGHT] [ENTER] Region 2 [3] [ENTER] or [DOWN] [ENTER] Region 3 [4] [ENTER] or [LEFT] [ENTER] Region 4 [5] [ENTER] or [TITLE] [ENTER] Region 5 [6] [ENTER] or [DVDMENU] [ENTER] Region 6 [7] [ENTER] or [RETURN] [ENTER] Region 7 [8] [ENTER] or [DISPLAY] [ENTER] Region 8
Or
Put player into standby modes by pressing power button on remote control. Then press Title button. Press Clear button. Press Power button.

Mar 21, 2010 | Sony DVP-NS400D DVD Player

5 Answers

I need an unlock region code for my Zenith DVD2200 player


After getting clarification from Fixya I can pass the links below to you to check yourself

Some players are harder than others to do this but you may want to
try here or here
Comments:
Toshiba's and JVC's are the harder ones to do

I use a Phillips myself as it is not only cheaper but has much more going for it than many of the higher end units. i throw anything at it and it just plays

The older the unit that harder it is to do the region free thing with.
I let my EX have the panasonic (big grin)

If you cant find a fix then look at the codes available for cheaper brands and how easy it is to do it before you purchase one.

Just a thought.

Nov 01, 2009 | Zenith DVD2200 DVD Player

1 Answer

How can I program a remote model number NB079 to a Zenith dvd pl


I found that this website should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/
if this helps please give a fixya rating as thats how we get paid.

Apr 28, 2009 | Televison & Video

6 Answers

Region unlock for LG DV480


If you have the LG DV 480 then try these steps
1 Turn the DVD player and open the disc draw, leave it empty
2 Press Pause
3 Type 0000
4 When the blue screen appears type "0" in the new region code
5 Press Pause
6 Power off the DVD player then turn it back on
It worked for me

Mar 15, 2009 | Televison & Video

1 Answer

I need a remote control, or need to know if my universal remote w


I just discovered this site because my remote just quit as well. Here is the direct link. http://www.partstore.com/Part/LG+Electronics+Incorporated/LG+Electronics%2fZenith/6710CDAL01C/New.aspx?ModelMfgName=LG+Electronics+Incorporated&ModelBrandName=LG+Electronics%2fZenith&ModelNumber=DVT412 Not bad price either.

Jan 20, 2009 | Zenith DVT412 System

2 Answers

I accidently hit the progressive scan button and now I can't get a picture when I try to watch a dvd.


just talked to LG Customer support and got them to send me a manual.

to turn off the progressive scan insert a disk and once it starts playing press stop, then press stop again and hold for 5 seconds this will turn off the progressive scan mode.

Dec 09, 2008 | Zenith DVT412 System

Not finding what you are looking for?
Zenith DVT412 System Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Audio Players & Recorders Experts

Marvin
Marvin

Level 3 Expert

82149 Answers

xalint1
xalint1

Level 2 Expert

152 Answers

Gagan Telecom
Gagan Telecom

Level 1 Expert

20 Answers

Are you a Zenith Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...