Question about Routers

4 Answers

Router Installation and configuration

How can i configure my 1800 series router

Posted by on

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 112 Answers
Re: Router Installation and configuration

You need to logon to the router via a computer that is on the same network as the router. open internet explorer and enter the routers IP address.example > The router's IP address should be on the bottom of the router, if not, on the computer you are using, click start, click run, type cmd and hit the enter key at the ms/dos window, type ipconfig /all
look for the default gateway IP address, this is your router. once you get the router's setup page, logon the router and configure your router. BPCS

Posted on Dec 31, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Router Installation and configuration

What if there is no default gateway IP address the what do I do to install the router?

Posted on Sep 01, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Router Installation and configuration

Hi im having a problem getting a dsl for 2700hg-b router and its says it unlocked so i can use it wiv orange boardband can any 1 help

Posted on Aug 25, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Router Installation and configuration

I am facing same kinda problem. I am using MSI RG60G wireless router.

My notebook detects the MSI, but I can not connect to Internet. I have tried on two different notebooks but same problem.

As mentioned in the documentation, the IP of the router is i.e. its default gateway. According to the instructions I set the IP of my computer to be with subnet mask and default gateway is the IP of router.

Now what is missing in DNS server? What should I write in their?

I followed the exact instructions as mentioned in the manual but its not working. Please help me.

Posted on Aug 13, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to set up belkin wireless router

Depend what you will like, routers like Belkin has some configurations.First run the installation CD.After the installation point your browser to the router IP to configure the router using the web UI interface.At here you can set a password for the UI many more.Win 7 has the capabilities to set up the driver for your router.

Apr 20, 2013 | Belkin Basic Wireless Router

2 Answers

Help me install a linksys wireless router

To install your wireless router connect a LAN cable from the router to the computer's LAN port.
Open a browser and type the Linksys configuration URL
The default login = admin
The default PW = admin
You can now configure the wireless settings .
To configure the wireless settings and to protect your wireless network from unauthorized access, please click on this link and follow my instructions :-

Dec 05, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Lost my installation disc

You do need an installation CD to configure the wireless router, just connect a LAN cable from the router to the computer. To configure the wireless router and secure your wireless network from unauthorized access, please click on this link and follow my instructions :
Normal 0

Sep 29, 2010 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

Computer wont recognize cable hookup

You will have to start the configuration from the wired network rather than the wireless network. Connect the computer directly to the router. I am assuming you might be trying to configure the router from the wireless network. Then use the installation CD to configure the router

Nov 29, 2009 | Routers

1 Answer

Port forwarding not working on cisco 1811 router? Via the SDM, I have configured NAT, and verified that these settings are correct. However, our videophone application (which requires, TCP:1720,15328-15248...

Most of the CISCO 1800 series have some ACL's configured by default.

You may want to run a show run from the CLI to make sure that there isn't one interfering.

Also from the CLI, see if you can debug port forwarding. I can't remember the command off the top of my head but I will look it up and post it for you.

Oct 15, 2009 | Cisco 1811 Router

1 Answer

Lost installation cd

Connect the computer to the LAN port of the router, connect the modem to the Internet/ WAN port on the router, access the configuration page of the router (Example the router as dynamic IP (DHCP) and configure the wireless settings as WPA or WEP encryption.

Mar 15, 2009 | NetGear WGR614 Wireless Router

1 Answer

E1 or T1 to pabx to router to softphone

Yes, configure second Cisco E1 port to simulate you telcom (network side) and connect it to PB, and first Cisco E1 to your telecom provider.

On Cisco router configure voice ports, and number manupilation, so you can catch any call and redirect it anywhere (Voip, Telco, PBX).

I tryed that with Ericcson, and it didn't work until connections where like these
telco <-> Cisco VoIP gateway (E1x2) <-> PBX

PBX's are not very flexible, Cisco is.

Jan 27, 2009 | Smart Modular 128MB SDRAM Module for Cisco...

2 Answers

1841 series router

1. if router is configured connect it straight through
2. if router is not configured if u want to configure through console use blue color cable connect to router came with router

if u want to more about configuration or anything about this 1841 i can help
u in configuring it
send mail :

Feb 22, 2008 | Routers

1 Answer

Difference between router


Type II routers are Wireless ADSL (Asynchronous Digital Subscriber Line) Routers.They are used as routers for connecting to the Internet Wi-Fi.(i.e)You may also call them as modem.Type II routers links a DSL to ISP(Internet Service Provider).You cannot change most of the Configuration of the type II routers, you allowed to change only few configurations.

Example ::
>>Cisco 3620

The Other Router like Cisco 1800 series /2800/ 3800/ 7600/ Catalyst 6500 Series, they are all Higher Routers, where u can configure and Program them, for connecting a LAN/WAN/MAN.

I hope is answered your question!!! Any more clarification, plz reply me!!

Thank YOU


Feb 18, 2008 | Routers

Not finding what you are looking for?
Routers Logo

Related Topics:

2,544 people viewed this question

Ask a Question

Usually answered in minutes!

Top Routers Experts


Level 3 Expert

18259 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers


Level 3 Expert

4327 Answers

Are you a Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides