Question about Mitsubishi WS-55819 55" Rear Projection Television

1 Answer

Hitachi 51 hourglass shape picture

I had a mark on the screen of my 46 hitachi ultravision projection tv, someone gave away a 51 inch hitachi ultravision. I thought I wold just replace the screen, but i decided to keep the bigger tv, and switched the main circuit board. The only problem is an hourglass shape, that I didn't have on the other tv. Was this caused by the switching? If I put the board back in the old tv, would I still get the same problem in the old tv? What can i do to fix it. I have another board, if there are parts that I could try to use. Thanks

Posted by on

  • 1 more comment 
  • brussel Dec 31, 2007

    Could I get that part off the other board? nad what does it look like?

  • brussel Dec 31, 2007

    Can I get this horizontal switch off the oother board I have and switch them?

  • brussel Dec 31, 2007

    Ok, I changed the mother board. The mother board doesn't give this problem on the other tv. I also changed the small circuit boards that are attached to the bottom of the 3 lenses also. Still no result. Is the problem in the lens itself? Could there be an adjustment?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 346 Answers

Horizontal circuit is not working

Posted on Dec 31, 2007

  • cyriacus joseph Dec 31, 2007

    you need professional help.it could be a number of things in the horizonta circuit e.g yoke .transistor ,transformer ,diode etc..

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hitachi digital ultravision 50"


Hello bugster421,

Can you post a picture of this problem? It will go a long way in determining what is happening.

Thank you,
Shuttle83

Oct 26, 2007 | Sony KP-46WT500 46" Rear Projection...

1 Answer

I have to replace the protective screen on my 46 inch Ultravision Model # 46UX24B Serial # V6H002493 which is cracked. Can I get a replacement from you? If so tell me what to do, and what the cost...


Call your local TV Shops and ask do they have Good use one for sell,or look on EBay under Electronics TV/Parts . Encompass Parts 1-800-638-3328 and Go to this website Shopjimmy.com

Nov 05, 2010 | Hitachi 46UX50B 46" Rear Projection...

1 Answer

Need help locating a box to make my TV receive true HDTV


You Dont need one your set is HD. So when the switch happens you are good to go. The only TVs that are going to need converter boxes is those who do not have HD or only have antenna.

Dec 27, 2008 | Hitachi 51F510 51" Rear Projection...

2 Answers

Problems with my 50 inch hitachi ultravision projection screen tv


check the solder around the area of the vertical IC. solder is either cracked or else cold. Cold solder appears as dull. Resolder anything that isnt shiny.

May 20, 2008 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

I have a 50 inch hitachi ultravision that has no picture or sound but power light is on


Probably a 'cold or detatched' solder joint on a component on that perticular circuit board you are 'wedging' with a plastic rod.

Apr 16, 2008 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer

Hitachi UltraVision has blue streak on right side of screen.


convergent systems.. I callled Hitachi....

it cost $600 to relpace the part... all 3 colors red yellow blue,.... tech took the part out and will replace it in about 3 or 4 days.

I was told by technician that it was a very very good tV in fact he said he would buy it from me for $300 and take it away.. I am considering that ... but a new one with Picture in picuture will be 2000 or more

Apr 06, 2008 | Hitachi UltraVision CineForm 55VG825 55"...

2 Answers

Problems with my 50 inch hitachi ultravision projection screen tv


the best thing 2 do is buy a new one and get guarnteed with it again
if u try 2 fix it it not 50% working


if u got guarnteed then take it back (or phone them to come)

Nov 07, 2007 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

I have a 50 inch hitachi ultravision that has no picture or sound but power light is on


you have lookse connection on the video convergance amp ic

KIT10 $29.50
Repair Kit for Hitachi convergence Chassis DP-14G
KIT10 Includes 2 pcs STK392-150 , 1 each of the following 1W axial lead fusible resistors:


http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Nov 04, 2007 | Hitachi UltraVision CineForm 55VG825 55"...

Not finding what you are looking for?
Mitsubishi WS-55819 55" Rear Projection Television Logo

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1230 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...