Question about Canon VB-C10 / VB-C10R Network Camera

1 Answer

Unable to connect via ethernet to camera.

I am unable to connect to my Canon VB-C10R via ethernet. Have re-set many times. Camera has had recent firmware upgrade from Canon 8 months ago. Any suggs?Dale

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Unable to connect via ethernet to camera.

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Where can i find a Vista driver for Canon VB-c50iR camera ?


Jul 16, 2010 | Canon VB-C50iR Network Camera

1 Answer

I dont know if its a Canon problem but i entered my webcam name Tulka Power Plus into my search window I came across ref to Canon. Could you tel me if you can advise me how to get a driver or software for...

Copy this site and paste it in your web browser address bar and hit ENTER.

to download the Camera Diagnostic Tool and run it to check out your camera and/or problem.

Be sure the camera is plugged into the USB port before running the program.

As you run the program, write down the info about the camera so you will know what model and who manufactured the camera you have
attached so you can get the proper software drivers for it.

Then let me know and I'll help you find the driver download.
Hope this helps. Bud

Jan 12, 2010 | Canon VB-C10 / VB-C10R Network Camera

1 Answer

Not showing the network ip address. Note i changed it from 192... to 172... and now trying to go back to the 192.168... network

Set the camera to "automatically obtain an IP-address".
Connect the camera, via an Ethernet network cable, to a router.
The router will supply a valid IP-address to the camera; much simpler than trying to "manually" set an IP-address, network-mask, and gateway IP-address.

Dec 08, 2009 | Veo Observer Network Camera

2 Answers

No detection in wireless condition

- Make sure you enter the correct wireless settings on the camera accordingly to the wireless settings of your wireless router.

Mar 15, 2009 | D-Link DCS-6620G Network Camera

1 Answer

Tevion Web Camera

solution for XP users.
Use the medion driver (MD85081). go to their support pages and search for "webcam".
Once the driver is downloaded, remove the camera if connected.
Extract the software (default is c:/Medion folder),
Install the software.
Now you can connect the camera and it will acknowledge it.
Use the start/PC-30/Amcam program to test it. (use Amcam/Devices menu to select the camera)
Good Luck.

Sep 16, 2008 | Logitech Webcam

4 Answers

Intel easy pc camera driver problem

Normal 0 Did you install the software with the camera connected to the computer? Disconnect the camera from the USB port and reinstall the software. When the program asks you to connect the camera, do so, and it should work. Hope this is of some help. Bud

Below is info for setting up Audio & Video to chat on line after you install , either Skype or a messenger program.

Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype set it up as follows:
  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now see and talk to you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Aug 02, 2008 | Intel Easy PC Camera Webcam

1 Answer


You would code using ADO (for VB6) or ADO.NET for VB.NET and other .NET languages.

May 27, 2008 | Canon VB-C10 / VB-C10R Network Camera

3 Answers

Unable to detect the camera

try to reset the camera at the factory default and then use ip setup program

Apr 22, 2008 | Sony SNC-RZ30N Network Camera

Not finding what you are looking for?
Canon VB-C10 / VB-C10R Network Camera Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Webcams Experts

Cosma Papouis
Cosma Papouis

Level 3 Expert

404 Answers

old marine
old marine

Level 3 Expert

1298 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers

Are you a Canon Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides