Question about NetGear WGR614 Wireless Router

1 Answer

NETGEAR Router problem

When I try to log onto the Internet through my Netgear router, it says (192.168.1.3) is managing this device. What does this mean and how can I fix this?
Thank you very much,
Patty
ephelsing@charter.net

Posted by on

  • Anonymous Mar 29, 2014

    how to hook up my router netgear 900 4 port with charter communications

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 310 Answers

Do you get on the internet thrue your router? if not property your network conection out look at your ip and subnet. subnet should look like 255.255.255.0 or 255.255.254.0 if not reboot your router by unplugging the power cord for 30 seconds or so

I’m happy to assist further over the phone at https://www.6ya.com/expert/james_1cb31da1bc8c6102

Posted on Dec 31, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to Install Netgear Router Using the Wireless Device


hi john.
To install your NETGEAR wireless router using your wireless device:
  1. Get the preset wireless settings of your NETGEAR router. It is written on the back or at the bottom of your device.
  2. On your wireless device, open the WiFi connection manager and find the SSID or WiFi network name of your NETGEAR router.

How do I install my NETGEAR router using a wireless device ...

https://kb.netgear.com/.../How-do-I-install-my-NETGEAR-router-using-a-wireless-devic...
How to Install Netgear Router Using the Wireless Device Google Search

Nov 06, 2017 | NetGear Computers & Internet

1 Answer

Lost password and need to reset new password. netgear wireless - G router WGR614.


If you cannot log into your router because you have forgotten the router password or your network has been hijacked, please refer to "Lost or forgotten password for router or other device" below.
1.Connect your computer to the router with an Ethernet cable .2.Log in to your NETGEAR router by browsing to http://www.routerlogin.net or http://www.routerlogin.com. Enter the username (admin) and password. By default, the password is password or 1234 unless it has already been changed.3.From the left-hand navigation menu of the Router Manager, select Set Up > Wireless Settings.From the center screen, select your encryption type from under the Security Options heading.
If the wireless network passphrase is visible, review it and use it to log devices onto your network.If it is not visible, you can change your wireless passphrase;
If you cannot log into your router:
Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default username ("admin") and password (either "password" or "1234" depending on your router) to reconfigure your router settings.
NOTE: Restoring factory defaults on a device will erase any customizations you have made. You will lose any configurations saved to the device!
To reset the password /router follow the steps below:
Press the reset button on the back until the test light blinks. This takes about 10 seconds. (To avoid accidental resets, the small button is recessed. Use a pen or paperclip to access it.)Release the button.Wait for the router to reboot.Log in with the default password.If the router configuration was not cleared, try these additional steps AFTER the router has finished rebooting.
Unplug the router's power.Press and hold the reset button. While the button is held down, reconnect router's power.Continue to hold the reset button for 20 seconds after reconnecting the power.Wait for the router to reboot.Log in with the default password.
For more information see the link below:
http://support.netgear.com/app/answers/detail/a_id/9665

Also refer to router's users manual >The manual is available online >Click this link ->http://support.netgear.com/app/products/family/a_id/1296
Select the right WGR614 >>Next click Documentation > click on the router's setup manual to start downloading ..
Please let me know if you need further assistance on this issue .

Nov 20, 2011 | NetGear WIRELESS-G WGR614 802.11G WIRELESS...

3 Answers

Lost my password


  • Username = admin
  • Password = password
    • For older devices, password = 1234
If you have changed the default password and have forgotten it, you will need to reset the NETGEAR device to factory default settings in order to use the default username and password.Please note: restoring a device to its factory default settings will erase any changes you have saved to the device.

If you have changed the default password and have forgotten the password, you may need to reset the NETGEAR device to factory default settings.When a NETGEAR device resets, it goes back to the state when it was new - all information that was entered by hand is lost! Examples include critical things you need to get online, such as ISP username, ISP password, IP addresses, wireless security keys, and ports and services that were opened. It all needs to be re-entered.
So, have your ISP information before resetting the router.Naturally, if you moved to a new city, or if you bought a used router, the old information in the router may not be of use to you. Contact your ISP if you can't connect any computer directly to the Internet. Then, if there is a connection problem when the router is added, see No Internet Access Through the Router Reset for most routers with a reset button on the rear panelWrite down configuration information such as IP addresses, security keys, opened ports and services, etc., that you modified. (The default username is admin and the password is either password or 1234. Try these before resetting the router.)
  1. Press the reset button on the back until the test light blinks. This takes about 10 seconds. (To avoid accidental resets, the small button is recessed. Use a pen or paperclip to access it.)
  2. Release the button.
  3. Wait for the router to reboot.
  4. Log in with the default password. If the router configuration was not cleared, try these additional steps AFTER the router has finished rebooting.
  5. Unplug the router's power.
  6. Press and hold the reset button. While the button is held down, reconnect router's power.
  7. Continue to hold the reset button for 20 seconds after reconnecting the power.
  8. Wait for the router to reboot.
  9. Log in with the default password.
For DGN2000 / DG834Gv5 Routers
To restore the factory default configuration settings when you do not know the login password or IP address, press both the Wireless button and WPS button on the side of the modem router for 5 seconds.
For FR314, FR318, and FV318
These routers require reloading the firmware in order to recover from a lost password. Download the most recent firmware from NETGEAR's Web site before proceeding. Follow the instructions in the manual.
For routers with a 9-pin manager port on the rear panel: RT314, RT311, RM356, RT328, RT338, RH340, and RH348
See Updating Router Firmware That Uses a Manager Port.
This applies to:
  • All NETGEAR devices

Sep 20, 2011 | NetGear WGR614 Wireless Router

2 Answers

I need my netgear password


Most of the NETGEAR devices, except ReadyNAS products and Fully Managed switches, have the following default username and password:
  • Username = admin
  • Password = password
    • For older devices, password = 1234
If you have changed the default password and have forgotten it, you will need to reset the NETGEAR device to factory default settings in order to use the default username and password. Click here to learn how to reset the NETGEAR device to factory default settings. Please note: restoring a device to its factory default settings will erase any changes you have saved to the device.

Reset and Restore the NETGEAR device to Factory Default Settings

Symptoms:

  • Forgotten/lost password to log into the NETGEAR device
  • Cannot access the NETGEAR device web interface
Click here for video walk through example of how to reset the WGR614v9 router.
video-icon2.jpg

Resolution:

If you have changed the default password and have forgotten the password, you may need to reset the NETGEAR device to factory default settings.

When a NETGEAR device resets, it goes back to the state when it was new - all information that was entered by hand is lost! Examples include critical things you need to get online, such as ISP username, ISP password, IP addresses, wireless security keys, and ports and services that were opened. It all needs to be re-entered.
So, have your ISP information before resetting the router.
Naturally, if you moved to a new city, or if you bought a used router, the old information in the router may not be of use to you. Contact your ISP if you can't connect any computer directly to the Internet. Then, if there is a connection problem when the router is added, see No Internet Access Through the Router
Reset for most routers with a reset button on the rear panel
Write down configuration information such as IP addresses, security keys, opened ports and services, etc., that you modified. (The default username is admin and the password is either password or 1234. Try these before resetting the router.)
  1. Press the reset button on the back until the test light blinks. This takes about 10 seconds. (To avoid accidental resets, the small button is recessed. Use a pen or paperclip to access it.)
  2. Release the button.
  3. Wait for the router to reboot.
  4. Log in with the default password. If the router configuration was not cleared, try these additional steps AFTER the router has finished rebooting.
  5. Unplug the router's power.
  6. Press and hold the reset button. While the button is held down, reconnect router's power.
  7. Continue to hold the reset button for 20 seconds after reconnecting the power.
  8. Wait for the router to reboot.
  9. Log in with the default password.
For DGN2000 / DG834Gv5 Routers
To restore the factory default configuration settings when you do not know the login password or IP address, press both the Wireless button and WPS button on the side of the modem router for 5 seconds.
For FR314, FR318, and FV318
These routers require reloading the firmware in order to recover from a lost password. Download the most recent firmware from NETGEAR's Web site before proceeding. Follow the instructions in the manual.
For routers with a 9-pin manager port on the rear panel: RT314, RT311, RM356, RT328, RT338, RH340, and RH348
See Updating Router Firmware That Uses a Manager Port.

Here is a small video that shows you how:

http://kbserver.netgear.com/media/flash/training/Troubleshooting/NG_WGR614V9Router_TS_LostPassword.html

Good luck.

Mar 10, 2011 | NetGear WNA1100 Wireless-N 150 USB Adapter...

1 Answer

Router stopped recieving an internet connection all of a sudden. all cables are connected as befour ,


Perhaps try logging into the GUI by opening a web browser and typing in "www.routerlogin.net" - - us admin/password to log in and manage the device. In there you can find the status of the router to give you more information. Otherwise try resetting the device and/or upgrading the firmware.

Feb 22, 2011 | NetGear WNR2000 Wireless Router

1 Answer

I have a netgear fvm318. I have tried to reset the device but now when I switch it on it goes into test mode (i.e. power and test light only) then all the lights on internet port & Ethernet ports go...


Log in to your NETGEAR router by browsing to http://www.routerlogin.net or http://www.routerlogin.com. Enter the username (admin)and password by default the password is 1234 unless it has already been changed
from the left-hand navigation menu of the router manager,select wireles set up>wireless settings
from the center screen,select your encrytion type from under the Security Options heading
if the wireless network passphrase is visible,review it and use it to log on devices onto your network.
If it is not visible you can change your wireless passphrase but changing your passphrase will cause you to lose your wireless connection
Connect your computer to the router using an Ethernet Cable before entering a new passphrase into the text box and clicking apply.

hope this helps

Feb 17, 2011 | NetGear Fvm318 Firewall Wireless Router...

2 Answers

Lost my netgear connection. i have two new laptops i was trying to hook up. called tech. support w/HP they told me to plug the router into my lap top and i cant use netgear now. can u help


  1. Log in to your NETGEAR router by browsing to http://www.routerlogin.net or http://www.routerlogin.com. Enter the username (admin) and password. By default, the password is password or 1234 unless it has already been changed.
  2. From the left-hand navigation menu of the Router Manager, select Set Up > Wireless Settings.

3. From the center screen, select your encryption type from under the Security Options heading.

    • If the wireless network passphrase is visible, review it and use it to log devices onto your network.
    • If it is not visible, you can change your wireless passphrase; however, changing the passphrase will cause you to lose your wireless connection. Connect your computer to the router with an Ethernet cable before entering a new passphrase into the text box and clicking Apply.
If you cannot log into your router:

Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default username ("admin") and password (either "password" or "1234" depending on your router) to reconfigure your router settings.

Dec 26, 2010 | NetGear Computers & Internet

1 Answer

How to connect a wireless router netgear without a cd


  1. Log in to your NETGEAR router by browsing to http://www.routerlogin.net or http://www.routerlogin.com. Enter the username (admin) and password. By default, the password is password or 1234 unless it has already been changed.
  2. From the left-hand navigation menu of the Router Manager, select Set Up > Wireless Settings.

3. From the center screen, select your encryption type from under the Security Options heading.

  1. If the wireless network passphrase is visible, review it and use it to log devices onto your network.

hope this helps

Sep 23, 2010 | NetGear WGR614 Wireless Router

1 Answer

I am using BSNL India broad band connection. I am not able to install my Netgear modem with router on my computer. on connecting the modem to the CPU, no further window is opened where i can enter user...


  1. follow the links hope this helps you
  2. Log in to your NETGEAR router by browsing to http://www.routerlogin.net or http://www.routerlogin.com. Enter the username (admin) and password. By default, the password is password or 1234 unless it has already been changed.
  3. From the left-hand navigation menu of the Router Manager, select Set Up > Wireless Settings.
3. From the center screen, select your encryption type from under the Security Options heading.
    • If the wireless network passphrase is visible, review it and use it to log devices onto your network.
    • If it is not visible, you can change your wireless passphrase; however, changing the passphrase will cause you to lose your wireless connection. Connect your computer to the router with an Ethernet cable before entering a new passphrase into the text box and clicking Apply.
If you cannot log into your router:
Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default username ("admin") and password (either "password" or "1234" depending on your router) to reconfigure your router settings.
NOTE: Restoring factory defaults on a device will erase any customizations you have made. You will lose any configurations saved to the device!
See the following articles for more information:


Sep 13, 2010 | NetGear DG834G Router

3 Answers

How to install


look u need three things to connect wirelessly

1. Internet from Provider
2. Laptop with Wireless Card or Desktop
3. Wireless Router

pls check all 3 thingds in place connect an ethernet cable provided by netgear to ur internet provider modem if u have one and see u connect at INTERNET port of router at back

also see where u conenct at modem back there might be only one port so u dont have difficulty in it

then switch On ur Laptop Wireless from the button provided a light will blink with Dish Antenna Type icon or Tower icon then ur laptop will automatically detect the wireless router with name of default or Netgear or something like that

and it will auto connect to router

if u want to setup WEP security so no one else can use ur internet service u can setup WEP KEY for access u can ask me after u get connected

pls rate me WELL !

Jul 08, 2009 | NetGear DG834G Wireless Router

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

Related Topics:

989 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2269 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Mike

Level 3 Expert

4356 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...