New plates have been inserted into the scanner and every 19 pages or less when I have to change from...
(More)
New plates have been inserted into the scanner and every 19 pages or less when I have to change from black and white to greyscale it stops and the red error light comes on. The only way I have found to stope this probelm is taking out the plates closing the scanner, clicking the start button (or F7) 2-3 times and then re-inserting the plates....Is there an easier method?
when scanning pages with no divider scanner works great, but when scanning documents with blank...
(More)
when scanning pages with no divider scanner works great, but when scanning documents with blank group separator pages it skips pages. This may be a software problem,but i am not sure. Where can you get a service manual for these scanners.
My Kodak I260 paper tray does not automatically lower after all pages have been scanned or feed into...
(More)
My Kodak I260 paper tray does not automatically lower after all pages have been scanned or feed into the unit. This condition appears several times a day after scanning 25 to 100 hundred documents at a time - we are using Windows 2000. The tray sensor does not appear to be clogged or dirty and the unit requires a power cycle to recover.
When I scan my work capture software index adds 8 extra zeros how do I make it that it only indexes...
(More)
When I scan my work capture software index adds 8 extra zeros how do I make it that it only indexes the barcode numbers for example it looks like this 0000000012345.tiff I need it to look like 12345.tiff