Question about Mitsubishi WD-52628 52" Projection HDTV

3 Answers

No Picture At All on my DLP Mitsubishi

Although I have no indications from the "Lamp" indicator on my WD_52628 DLP HD TV, I get no video output at all. The lamp is on, as I can see by looking at the wall behind the TV and feeling the warm exhaust flow. But I get no picture -- not the menus, not from the broadcast TV (although I have sound) nor from the input with the cable signal on it. Not even being able to see the menus really worries me.

I've tried the reset button on the front, but that didn't help. I'm concerned that the DLP chip itself might be toast.

Any ideas??

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: No Picture At All on my DLP Mitsubishi

I just press the menu and enter button and it seem to reset the set properly.

Posted on Oct 14, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Re: No Picture At All on my DLP Mitsubishi

HI sorry I'm not gonna be much help but I'm having a similar problem with the WD-52631 It powers on and i get sound but no picture. Only thing is that my set shuts itself off after about a 2 mins. when the power is on i get a code of 12 = no problems? but when power is off i get 66 = no lamp detected or my board is not picking up my lamp? I dunno. I've had this thing for a lil over a year and been through two lamps and had a tech. to my house to replace some sensor. Now more problems ughh!!!!! I really liked this tv too. its a shame it doesnt work worth a damn and mitsu tech support sucks.
good luck everyone

Posted on Feb 26, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,153 Answers
Re: No Picture At All on my DLP Mitsubishi

First do a self test to get error codes. To do this look on threads here or go to

Posted on Dec 31, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

What is error code 42 on wd62627

Double check as no 42 is indicated on their site.

Nov 29, 2012 | Mitsubishi WD-52627, WD-52628, WD-62627,...

1 Answer

How do you know if your lamp is out. there is still light on in the back of the tv

An LED indicator on the front panel of your TV will blink even you have light in the back panel of your TV this LED indicator will remind you if the lamp must be replace because DLP projection has a lamp hour meter the lamp time for this DLP 6000 to 8000 hours.

Sep 23, 2011 | Mitsubishi WD-62526 Projection TV

3 Answers

I have a Mitsubishi WD 52628. I replaced the tv

try turning it on hold the menu button for eight seconds menu pops up try reseting the settings again as before you had the problem

Jan 23, 2010 | Mitsubishi WD-52628 52" Projection HDTV

1 Answer

Lamp Indicator is Red

Its much more likely that your getting a 34 error which is a lamp abnormality vaused by defective capacitors on the power board. You can get the V26 DLP power PWB repair kit at the following link that should repair the issue. Chances are your old lamp is still good.

May 19, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Steady Yellow Lamp Light on Mitsubishi WD-52628

no its just indicating that the lamp is reaching the end of its lifespan,

Mar 15, 2009 | Mitsubishi WD-52628 52" Projection HDTV

1 Answer

Buzzing noise from Mitsubishi DLP WD-52327 after replacing bulb

Did your replace lamp come on the screen or did you lose picture? Just because the LED indicator suggest replace lamp it doesn't mean it needs it. If your pix was dull or loss of brightness then replace it, if not then just reset your lamp timer, check your owners manual for instructions.

Feb 14, 2009 | Mitsubishi WD-52327 52" Rear Projection...

1 Answer

Mitsubishi DLP - model #WD62725

you have mention that after 10-15 seconds T.V starts up, will you give total description of the T.V within that 10-15 seconds?

Aug 11, 2008 | Mitsubishi WD-52525 52" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-52628 52" Projection HDTV Logo

335 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1187 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

66494 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides