Question about Flat Panel Televisions

1 Answer

Mitsubishi HD 1080 series 41 inch flat schreen tv

Color allignment has shifted. red, green no longer aligned. I remember when we bought it the installer said something about needing to periodically realign the colors. Can't figure out how to do it. aligning red and blue convergence does not seem to be the answer.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 35 Answers
Re: Mitsubishi HD 1080 series 41 inch flat schreen tv

Is this a rear projection? if so.. the best advice is to have it professionally looked at. especially if it involves a cube. it can involve realignment or replacement of the cube

Posted on Dec 31, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

VIZIO Tv E422VA picture showing red or green color on dark areas of screen.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
Faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent.

Oct 29, 2015 | Vizio E422VA 42-inch Widescreen LCD TV -...

1 Answer

How do i set convergence of red,green ,blue through service mode

Most common cause for this on the Sony KDL 40EX520 is that the connections to the screen across the top edge of the panel become loose causing blurred picture, mis-aligned colors etc. The Fix requires dis-assembly (Removal of the entire case) and re-seating/resecuring the connection across the top of the LCD Panel.
There is a pretty detailed video of the process (less the disassembly) here:

Jan 10, 2015 | Sony KDL40EX520 Bravia KDL-40EX520 40 Inch...

1 Answer

I left my 60 inch rear projection mitsubishi HD 1080 on overnight as I fell asleep in front of it for about 5 hours (11pm - 4am). This morning when I turned it on the picture is doing a fisheye effect on...

It sounds your Mitsubishi rear projection tv got problem with convergence output chips failure, I'm not aware about model number of this tv so unable to provide you specific info however, it is hardware failure and few parts need to be replaced by tv repairman.
Convergence output chips make align picture on front screen and if they stop working, you will see 3D look or bowed picture with different colors.
Contact local tv repair shop to fix this issue in tv.

Nov 17, 2010 | Flat Panel Televisions

1 Answer

RED COLOR NOT coming on TV, showing green all over place

I also have a samsung 40 inch. Try hitting the menu button on the remote the scrolling over to the right once and scroll down and hit pictures reset to see if that works. If it doesn't check your connections coming from the back of the source and the tv itself.

Sep 03, 2009 | Hitachi 50V500 50 in. HD-Ready LCD...

1 Answer

Green band
click warranties...
Important Warranty Announcement for LCD TV Owners

Jul 26, 2009 | Mitsubishi LT-52244 TV

1 Answer

I am getting a double image on my 48 inch television how can i get rid of it? it is showing colors green and red on double image

Assuming that your TV is a rear-projection TV, then it sounds like the separate red, green & blue tubes aren't set correctly.

Each tube needs to be alligned exactly to produce the image on the screen. If any of the 3 are mis-alligned then the effect you describe is caused.

Somewhere in the menu settings, will be an option to set the Convergence. This option will allow you to set the allignment of all three tubes.

Older sets do not have this option, and need to be adjusted via controls on the main PCB.

Apr 22, 2009 | Flat Panel Televisions

1 Answer

Can't loate bool;et for Mitsubishi HD 1080 Series Medallion

it is usually in the Audio settings,sometimes by the CC settings, if you go to the TV and enter th menu from the set, go thru one at a time until you find the spot to turn it off, it is under options or Menu on the remote also, there maybe an SAP Option on the remote itself, but you may have to press another key first like a "Function: Key.
I hope this helps some, if so please give me a good (fixya) rating. Thanks and have a Blessed Day

Apr 08, 2009 | Flat Panel Televisions

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

66444 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

6993 Answers

Are you a Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides