Question about Projection Televisions

2 Answers

Vs-4562 screen rolling

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: vs-4562

My screen is starting to roll on my tv as well. After about 10 minutes, it quits but gradually comes back. Is there anything I can do to fix it other than buying a new tv?

Posted on May 20, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: vs-4562

I need to replace my screen which was damaged while moving. Where can I find this part?

Posted on Jan 16, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Screen rolls maybe vertical sync


May 26, 2009 | Mitsubishi VS-45605 50" Rear Projection...

1 Answer

Mitsubishi mod. vs-5072 rolls how fix?

check for swollen capacitors- bad capacitors will cause the screen to roll. If the top of a capacitor even looks SLIGHTLY puffed up, replace it!

Dec 19, 2008 | Mitsubishi VS-60611 60" Rear Projection...

1 Answer

Picture rolling horizontally and vertically

tv needs repair c2c52 and c2po5 need to remove .both should be on the signal pcb

Nov 16, 2008 | Mitsubishi VS-50605 50" Rear Projection...

2 Answers

Mitsubishi vs5003r troubleshoot

I found this in another website... i hope this can help you. I'll try too...

Found this on the web, hope it helps.

Thank you for contacting Mitsubishi Digital Electronics America, Inc. We
are pleased to be able to assist our customers via our website. Here is the
information that you have requested:
TV Lock #8


Color Televisions
CS-20EX1, CS-20301, CS-26EX1, CS-26201, CS-26301, CS-2725R, CS-27EX1,
CS-27MX1, CS-27TX1, CS-27200, CS-27201, CS-27301, CK-27304, CK-27306,
CS-27401, CS-27403, CS-3135R, CK-3136R, CS-31AX1, CS-31FX1, CS-31MX1,
CK-31MX2, CS-31301, CK-31302, CS-3525R, CK-3526R, CK-3527R, CS-3535R,
CK-3536R, CS-35X7, CS-35AX1, CS-35FX1, CK-35FX2, CS-35MX1, CK-35MX2,
CK-35MX3, CS-35201, CS-35201A, CS-35203, CS-35205A, CS-35301, CS-35401,
CK-35402, CS-40FX1

Projection Televisions
VS-40VA2, VS-4517S, VS-45VA1, VS-45VA2, VS-4561, VS-4562, VS-5016R,
VS-5017S, VS-50VA1, VS-50VA2, VS-50VF1, VS-50VF2, VS-50VX2, VS-50VX3,
VS-5061, VS-5062, VS-6017R, VS-6026R, VS-60VA2, VS-60VF1, VS-60VF2,
VS-60VX2, VS-60VX3, VS-6061, VS-7017R

This system locks only the entire TV. The TV will display a screen that
will indicate "Parental Lock ... Now the lock is on" and request the
personal four digit code when the TV is powered on.

IMPORTANT> You must use the original remote control that came with the
TV to release the Parental Lock, you cannot use a remote
that came with a VCR, Audio System or from any other

1. Depending on which remote came with your TV, press the button at
the top labeled TV,OR set the TV/VCR switch in the upper left
corner of the remote to the TV position. .

2. Press the button on the remote labeled POWER.
The TV will turn on and display an information
screen that indicates "Parental Lock ... Now the
lock is on" and ask for the four digit personal code.

3. Press the #9 and the QV buttons at the same time.
The TV will turn on.

4. Press the button labeled MENU.
The "TV Main Menu" will be displayed.

5. Press the ADJUST UP or DOWN button to move the arrow next to the
"Advanced Features" selection and then press ENTER.

The "Advanced Features" menu will appear and
indicate that the lock is ON.

6. Press the ADJUST button to move the arrow next to the "Parental
Lock" option, and then press ENTER.
The screen will change to indicate "Parental Lock
... Now the lock is on" and ask for the four digit
personal code.

7. Press the #9 and QV buttons at the same time.
The screen will return to the "Advanced Features"
menu and indicate that the lock is off.

8. Press the MENU button twice to return to normal viewing.

The original lock code has now been erased and the lock canceled.

Oct 26, 2008 | Projection Televisions

1 Answer

Rolling screen

my screen on my mitsubishi won't stop rolling

Aug 22, 2008 | Mitsubishi VS-50607 50" Rear Projection...

1 Answer

TV screen jumps and rolls, sometimes won't stay on

Try Re-soldering the vertical yoke connection and the vertical output IC. Thats a common problem in that model.

Feb 26, 2008 | Mitsubishi VS-45607 45" Rear Projection...

1 Answer

Rolling screen

Do self test first then get error codes, to do this look in threads here or

Dec 19, 2007 | Mitsubishi VS-50611 50" Rear Projection...

1 Answer

No parts

is it the clear cover protecting the lentil screen behind that you are talking about. if so you dont need this. more often by removing it you get a better picture.
the lentil screen can be brought in the states quite easily.
doing a web search there is a company that will cut you a new one of the roll.

Nov 28, 2007 | Mitsubishi VS-45605 50" Rear Projection...

1 Answer

Misubishi vs-4562

I have a problem we do not have a remote and useing the tv we can not get the cross ahirs to match up. the red and green are close but the blue wont go any closer and its off by approx an inch

Oct 08, 2007 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers


Level 3 Expert

57192 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides