Question about Disney PC1310 TVD TV

1 Answer

Connecting DVD player to TV

I have the Pirates of the Caribbean TV and the matching DVD player and I connected them using the included cable but I cannot get a picture on the TV. The TV and DVD player both power up and I can hear the dvd player working, but no picture. There are only so many ways the cables can be connected, so what am I doing wrong?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Re: Connecting DVD player to TV

I'm not sure how much you know about the cables, I know I don't know anything about the specific TV and DVD player you have, but if the chords are AV cables (most likely) then they're most likely color coded, but not all TV connectors are. The audio part of the cables are white, and the video part of the cables are yellow. Other than that the only suggestion I have is making sure the TV is on an "imput", "video", or "game" channel (it's not one of the normal channels, and just about every TV has a different name for it). I don't know if any of that helps, so let me know, and if there is anything else I can do to help, I will. Also, sorry if any of my information is confusing.

Posted on Dec 30, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to get dvd on tv

There are generally 2 ways to connect a dvd player to a tv.1 If you have 3 rca connectors on the back of your tv (they are color coded yellow for video and white and red for audio left and right channels respectively) and the same connectors on the back or side of the dvd player.Use rca cables to connect the dvd player to the tv,connecting yellow to yellow white to white and red to red.Using the remote put your tv on video.Put the channel selector on the dvd/vcr player on video or L1 or E1 (depending on what brand dvd/vcr you have).2 connect a rf (coaxial cable from the rf output of the dvd/vcr and connect this directly to the rf (antenna) input to your tv.Put the tv on channel 3.Play the dvd/vcr to see if you have the video.If not put the tv on channel 4.Some dvd/vcr's put their signals out on channel 3 and others on channel 4.Good luck.

Sep 15, 2013 | Disney 13" TV

3 Answers

Connecting dvd

First, are you sure the cable is good? can you try it somewhere else? Second make sure your DVD is setup to output via component and the TV is using the input your connecting to.

Jun 01, 2008 | Standard (CRT) Televisions

1 Answer

I cant find the av jacks to hook up my dvd player

This model doesn't have any A/V jacks. Many low-end RCA models didn't include any special features. They can only pick up signals over the antenna input. What you'll need to connect your DVD player is an RF converter, which takes the audio and video signals from the player and turns them into a channel 3 or 4 TV signal that the set can pick up.

RF converters aren't hard to find. Radio Shack, Sears and Wal-Mart all say they sell them, and you can certainly find them online. Hooking one up is just a matter of connecting the necessary cable to the player and TV, connecting the converter power and setting the output channel. Then put the TV on that channel and you're set. Unfortunately, this will give you lower picture and sound quality than you get from a TV that allows direct A/V inputs, but it's the only option.

Nov 21, 2010 | RCA F25422 25" TV

2 Answers

I need help connecting tv to DVD player VCR and satellite box

Connect as following
1. Set top box - RF cable from STB to antenna socket on TV.
2. DVD player output to Video1 on TV
3. VCR output to Video2 on TV.
May be you can route VCR through the DVD player or viceversa. That you can see and try on ground.

Sep 28, 2010 | Haier TN201AUV 20" TV

1 Answer

Blue colors are now green.

It sounds connections are not matched yet. Make sure connections are green to green, red to red and blue to blue in dvd player and tv are correct.
Try another component video cable.
If problem still exist, test dvd player to any other tv, found ok then component input of this TV is bad, need to get it repaired.

Jan 24, 2010 | Sony FD Trinitron WEGA KV-27FS100 27" TV

1 Answer

Can i connect this to a dvd player? how?

you sure can - use the front audio/video connections and the existing cable that comes w your dvd player - the connectors on the front are red/white i believe - match those up to the ones from your dvd player

Sep 12, 2009 | Durabrand BH1304D 13" TV

1 Answer

How do I hook up dvd player

It should hook up like a regular VCR does. A short cable from the OUT on the back of the dvd player to the cable hookup on the back of the tv.

You can also use audio/video wires (3 wire cable). Somewhat same method...connect 3 wires to audio/video OUT of the dvd player to COMPONENT section on the back of the tv. Should be color coded to match colors on the 3 wires.

Hope this helps some. It is difficult to explain. Good luck!

Jul 31, 2009 | Sansui DTV3200 32" TV

1 Answer

Connecting VCR to TV

If you have the original remote controller, try to switch inputs. It must be on the f-connection ( coaxial) at the moment. You need to switch it to RCA or S-Video Inputs.

Aug 30, 2008 | Toshiba 27DF46 27" TV

1 Answer

Bad component input?

your cables could be defective or a bad solder at the input connectors.Make sure the colours of the cables are matching with that of the tuner and dvd.

Sep 05, 2006 | Toshiba 32AF41 32" TV

Not finding what you are looking for?
Disney PC1310 TVD TV Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Disney Standard (CRT) Televisions Experts


Level 3 Expert

57264 Answers

David Payne
David Payne

Level 3 Expert

13437 Answers

The Knight
The Knight

Level 3 Expert

66644 Answers

Are you a Disney Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides