Question about Evenflo Baby Gear

1 Answer

Exersaucer seat

I have an older exersaucer my father-in-law removed the cloth part of the seat to wash it and now we cannot figure out how to put it back on. Model #6081A7P1, Man. Date 15 Dec 98

Posted by on

  • rzrblade12 Apr 08, 2009

    i have done the exact same thing,...ofcourse i could put this back together,....a no-brainer, shiney and clean, lol, the exersaucer has now sat in the dining room, in it's clean, unusable state for 2 weeks...geesh!, so much for fun and clean toys!

  • Anonymous May 09, 2009

    My wife took it apart to clean the seat (while I was at work), but then couldn't figure how to put it back together again. And since she had *really* taken it apart I couldn't figure it out either.

    Thank goodness for the internet (and the web, and Google).



    The attached pdf was no good, but the link worked, despite being an https:
    https://plweb.evenflo.com/ShowDocument.a...

    The pictures were blurry as heck, but it gave me enough hints to get the toy back together (to my wife's utter amazement -- and mine too, since the toy I'm trying to fix is a 1999 SuperSaucer.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Evenflo - Exersaucer Instructions
25702569.pdf

https://plweb.evenflo.com/ShowDocument.aspx?ManualID=234

Posted on Nov 12, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i put the seat back on my evenflo exersaucer


There are several models of exersaucers, but hopefully the seat attachments are similar. Here is a video from Evenflo showing how to assemble the product. This might help you.

http://www.evenflo.com/resource.aspx?id=467&rcid=19

Sep 29, 2010 | Evenflo Exersaucer Triple Fun Active...

1 Answer

How to put the cloth seat back on


http://www.evenflo.com/resource.aspx?id=467&rcid=19
This may not be the one you have but this site will advise you how to get model and manufacture date so that you can get exact instuctions.

Jul 05, 2010 | Evenflo Exersaucer Triple Fun Active...

1 Answer

Need to put seat back on old evenflo exersaucer-no instructions


there should be small plastic clips on the material for the seat and then you just clip them to the plastic..... it sounds much easier then it is

Jun 05, 2009 | Toys

1 Answer

Seat removal I bought the Little Einstein exersaucer used without directions and we need to wash the seat. Is there a trick to removing it?


Try holding the exersaucer down with on hand and pulling up on the seat rim with the other to remove seat then flip over to snap off fabric.

Apr 13, 2009 | Baby Gear

1 Answer

I need to know how to put the seat in an Evenflo Exersaucer Deluxe because we received it that someone didn't need it anymore. Its an older on from 95. Please can someone help me because my granddaughter...


https://plweb.evenflo.com/faq_detail.aspx?faqid=3934

Question: How do I put the seat pad on the Exersaucer? spacer.gif Answer: 1.Line up the red diamond on the seat pad warning label with the triangle on the back of the seat ring. 2.Fit the elastic loops through the quarter inch gap between the seat ring and rotating rings and hook the elastic loops over the prongs on the bottom of the rotating ring. 3.The plastic tabs on the seat pad are only for reinforcement and don't hook to anything, but should be threaded between the 2 plastic rings. If you still need further assistance please refer to the instruction sheet or call the Evenflo ParentLink Consumer Resource Center at (800) 233-5921 or (937)773-3971 for further information.

Mar 25, 2009 | Evenflo ExerSaucer SmartSteps ABC Stroller

1 Answer

How to remove the seat cover on exersaucer


Hi, all the way around it are plastic bits sticking out and the seat cover is clipped onto the plastic bits, just lift them off one by one, all the way around. then when your done clip them back in again. hope this helps.

Mar 09, 2009 | Evenflo Toys

2 Answers

Exersaucer part


check
       https://plweb.evenflo.com/product_detail.aspx?prodid=9941
or
       https://plweb.evenflo.com/product_detail.aspx?prodid=12719

main parts for your model
       https://plweb.evenflo.com/product_search.aspx?txSearchModelNo=6161521&txSearchDOM=4/26/2005

Nov 14, 2008 | Baby Gear

1 Answer

I have a older exersaucer made by evenflo and i dont know how to put the seat back on


original instructions for any exersaucer
https://plweb.evenflo.com/ShowDocument.aspx?ManualID=234

25702569.pdf

Sep 10, 2008 | Evenflo ExerSaucer SmartSteps ABC Stroller

1 Answer

Old evenflo exersaucer


25702569.pdf

https://plweb.evenflo.com/ShowDocument.aspx?ManualID=234

Jun 03, 2008 | Evenflo ExerSaucer SmartSteps ABC Stroller

Not finding what you are looking for?
Baby Gear Logo

Related Topics:

1,732 people viewed this question

Ask a Question

Usually answered in minutes!

Top Evenflo Baby Gear Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22393 Answers

Rob Sinbad
Rob Sinbad

Level 3 Expert

709 Answers

Stitch85

Level 2 Expert

32 Answers

Are you an Evenflo Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...