Question about Lexmark Z611 InkJet Photo Printer

1 Answer

Download software to memory stick to down load to other pc

I have no internet at home and recieved a new pc that is not set up with the software for my Lexmark Z611 inkjet photo printer. I need to download the software from the internet on another pc to my memory stick to my new pc at home.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 689 Answers
Re: Download software to memory stick to down load to...

Hi Brian

Thats possible you can go to Lexmark's official suport website
Choose the model and download into you Memory Stick
You can insert memory stick into your computer and install the Software that you downloaded.

Please make sure your Operating system (Vista, XP etc) before you download.

Good Luck

Posted on Dec 30, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Need original software for installation of HP Photosmart C6180

Use a computer that has Internet connection to download the printer driver then copy the drivers to an USB memory stick and install the printer driver onto your computer using the USB memory stick.
You can download the HP printer drivers from their support WEB site. Please click on this link and select your model printer to download :-

Sep 09, 2012 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

My system gets hanged when i connedt hp laserjet m1522 printer.\r\nso i am not able to install

Make sure that the PC had enough disc space to load the software, there is no virus in the PC and also the memory is good.
If the PC can be scanned and checked, then the drives fragmented-- use system maintnenance, check your registery or if possible restore the PC to an earlier set date.
Also remove all the unwanted program files and clear the memory from unused programs. This will make the PC work faster and your new software driver /hardware will be installed.
If not download from the HP official support site.

Sep 13, 2011 | HP LaserJet M1522nf Multifunction Printer...

3 Answers

I have a HP mini 210 netbook. It has no CD drive and therefore I cannot install the software.

You should be able to download the drivers online. (i assume that you're looking for printer drivers).

Jan 10, 2011 | Printers & Copiers

1 Answer

I used this memory stick on my old PC at home and it was wrking okay. When i put it into the usb port it showed up ad removable E. Now I have upgraded my pc to a laptop it doesent recognise the stick....

I assume when you say "memory stick" that you mean a USB memory stick rather than a Sony memory stick.

You should try it in another USB port (if ther is one on your laptop). If that doesn't work, then try it in another PC - if it doesn't work in another PC either, then it is likely that the memory device is at fault, otherwise. If it works fine on another PC, then it is likely that it is the USB port on your new laptop that is at fault in some manner.

If you have another USB device you can use (anything will do - a mouse, webcam, etc), try it in the port you tried the memory stick in. If nothing happens, then in all likeleyhood, the USB port is at fault. If the other device works, then it is probably the USB memory device that is faulty.

If the device works in another PC, try reformatting it as FAT file system on that PC, and see if you can then see it in your new laptop.

Oct 21, 2010 | Printers & Copiers

2 Answers

I have a PIXMA MP 150 I lost the disk to load it back on to my repaired computer. Im also on dial up, Can I down load the software to get this working again ? Serial # JCBA87074

Find a friend with high-speed access.
Buy a USB memory-stick.

On your friend's computer, access CANON's web-site:

and download from the web-site to the USB memory-stick.

Carry the memory-stick back to your computer, and install.

Oct 29, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Software for HP PSC2355v ALL-IN-ONE Printer.Scanner.Copier. on to a CDRW . Because I'm at the Library and my computer is at home with my printer I lost the software CD-disc to the HP PSC2355v.

You have to ways to get the software , either downloading the software for free , and loading it into an usb memory stick, or by purchasing the CD from HP.

To download softwre and driver (install driver first) click: HP PSC 2355v All-in-One Printer

To purchase the disk: CD - HP Full Software and Driver

Apr 03, 2009 | HP PSC 2355v All-In-One InkJet Printer

1 Answer

Lost cd to to install printer to my laptop

Down load your drivers to a pc where you have internet connection, copy the drives to a USB memory stick and the load the drivers on your lap top and your ready to go.

Mar 03, 2009 | Lexmark Matrix 2580 9-pin 510cps...

1 Answer

Printronix5003H+ table mismatch

I'm sure you have fixed your printer by now... but reflash the printer.

Flash memory is contained in SIMMs (single in-line memory modules) located
on the controller board. Printer emulation and operating system software are
loaded into flash memory at the factory, but you will install software in some
• The customer buys the PGL or VGL graphics, Expansion-CT, or IPDS
option after the printer is installed
• The customer needs to upgrade printer software
• The customer needs different emulation software
• You have replaced the controller board
• You have added or replaced the flash memory SIMM
Emulation and operating system software are stored as a compressed file on
a 3.5 inch floppy diskette. This file is “executable.” You will expand it and copy
it into printer flash memory.
You can load software through the serial, parallel, or Ethernet port of the
1. If the printer has an Ethernet interface, refer to the PrintNet User’s Manual
for the download instructions. You are finished with this procedure. If you
are going to load memory through the serial or parallel port, continue with
this procedure.
2. Make a printout of all saved configurations. (Refer to the User’s Manual.)
(Installing new software erases all saved configurations. You will use the
printouts to restore printer configuration.)
3. Set the printer power switch to O (off).
4. If the printer is already connected to the serial or parallel port of a
computer capable of running an MS-DOS® based PKZIP® self-extracting
file, go to step 11. If not, go to step 5.
5. Unplug the AC power cord from the printer.
6. Disconnect all data input cables from the printer interfaces.
7. Connect a parallel data cable to the LPT1 port or a serial data cable to the
COM1 port of an IBM-compatible computer that is using the PC-DOS™ or
MS-DOS operating system.
NOTE: You can connect the cable to the LPT2 port if the LPT1 port is alreadyin use. The load commands are different if you use this port, as
described in the note after step 18.
8. Connect the data cable to the appropriate I/O port of the printer.
9. Plug the AC power cord into the printer.
10. Power on the computer.
11. Insert the emulation or upgrade diskette into diskette drive A (or B) of the
12. Make the diskette drive the active drive by typing the following at the DOS
A:<return> (If the diskette is in drive B, type B:<return>)
13. Get the name of the compressed file on the diskette by listing the
contents of the diskette; at the DOS prompt type:
The compressed file on the diskette takes the form FILENAME.EXE
Now write down the complete name of the file with the .EXE extension.
14. On the printer control panel, press and hold down the ON LINE + PAPER
ADVANCE keys. Without releasing the keys, power the printer on.
Continue holding the ON LINE and PAPER ADVANCE keys down for five
seconds, then release them.
NOTE: The port default is CENTRONICS; this is the standard load through
the parallel port. If you want to use the default, continue at step 18.
15. When you see “WAITING FOR PROGRAM DOWNLOAD” on the LCD,
press the < (NEXT) key. “SELECT DOWNLOAD PORT =
DATAPRODUCT” appears on the LCD.
16. Press < (NEXT) again to cycle through the download ports available in
the printer:
DATAPRODUCT (parallel)
CENTRONICS* (parallel) (default port)
RS232-9600 (RS-232 serial, 9600 baud)
RS232-19.2K (RS-232 serial, 19200 baud)
RS232-38.4K (RS-232 serial, 38400 baud)
RS232-115K (RS-232 serial, 115000 baud)
RS422-9600 (RS-422 serial, 9600 baud)
RS422-19.2 (RS-422 serial, 19200 baud)
RS422-38.4K (RS-422 serial, 38400 baud)
RS422-115K (RS-422 serial, 115000 baud)
17. When the printer download port you want to use is displayed on the LCD,
press ENTER. “WAITING DOWNLOAD / PORT = <your selection>
appears on the display.
18. At the DOS prompt on the computer type:
FILENAME.EXE -pb<return>
where FILENAME.EXE is the compressed file you noted in step 13. This
command decompresses the file on the diskette and copies it as a binary
file into the flash memory on the printer controller board.
NOTE: If you are loading the file using the LPT2 port on the computer, enter
the following DOS command:
FILENAME.EXE -pb 2 <Return>
The 9600 baud rate is the only selection older versions of DOS can
use. The baud rate information entered in the following DOS
commands must match the selection you made in step 16.
the load process and status. (LCD messages are listed in Table 2,
page 37.)
CAUTION Do not interrupt the downloading process once it has started.
Interrupting a download will damage the flash memory on the controller
board and PrintNet card ( if installed).
19. When the new program has successfully loaded into memory and the
printer has reset itself, set the printer power switch to O (off).
20. Unplug the AC power cord from the printer.
21. Remove the diskette from the computer and store it with the printer.


Jul 07, 2008 | Printronix Line Matrix P5215 Printer

Not finding what you are looking for?
Lexmark Z611 InkJet Photo Printer Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers


Level 3 Expert

18259 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides