Question about Hotpoint BWM12 Front Load Washer

1 Answer

Hotpoint bwm129 lights flashing

My hotpoint bwm129 lights keep flashing DELAY START and QUICK WASH and DOOR it starts to fill for about 2 mins then all 3 lights start flashing can u help please

Posted by on

  • Anonymous Jun 01, 2008

    I have a hotpoint bwm129, super silent. It became noisey on the spin cycles and crashed. I cleaned the filter at the bottom, which had coins and a hair bobble in, now it is quiet, but half way through the cycle it still crashes. The 'delay start' and 'quick wash' lights flash, and the locked door light flashes rapidly

  • Anonymous Mar 29, 2014

    hotpoint wml540

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 196 Answers

What mode are you starting this machine in ? I know this may sound silly and I'm trying to determe if this is a machine fault code or something else.

Posted on Jan 02, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Hotpoint BWM129 washing machine and the Delay start and Superwash lights are flashing. Can anyone explain what fault code this is? The door locked light is also on.


Manual says to unplug maching from wall for at least 40 seconds to a minute. This will reset the unit. If that does not work you will need to call a service tech.

Jan 30, 2015 | Hotpoint Bwd12, Bwd129, Bwm129 Washing...

1 Answer

What fault code on a Hotpoint BWM129 does Door Lock LED rapidly flashing along with Delay Start LED flashing intermittently represent?


replace the motors brushes check the filters
and clear any bits of bra wire etc

then reset the machine {usually hold power in and apply the mains}

May 25, 2014 | Hotpoint Washing Machines

1 Answer

My Hotpoint BWM129 drains at end of a cycle but doesn't proceed to spin, fault lights flashing are rapid Door locked and intermittent Delay Start. Does this fault code indicate a faulty drain pump or


Engine fault or main board fault. Most likely main board.
Check cable harness from main board to engine. Check the carbon brushes on the engine. If its all okay, replace main board

May 21, 2014 | Hotpoint Washing Machines

1 Answer

Hotpoint DC28 not washing


1.press cancel button
2.check if the door closes securely.
3.since there is water in d/w try running a short cycle.If it works, clean the inside thoroughly to ensure no clogs.

Jan 12, 2014 | Hotpoint 18 in. DC28 Slim-Line Built-in...

1 Answer

Hotpoint wma32pr door light keep flashing and no wash


1) test the lid switch for open
2) test the door switch for open too
3) see the diagram attached, any switch faulty can not START the motor.
God bless you
6_20_2012_9_43_27_am.gif

Jun 19, 2012 | Washing Machines

1 Answer

Hi I've Got A Hotpoint Aquarius CTD40 Tumble Dryer


that isn't a model number,open the door to the dryer,look around the opening where you put the clothes in and send the full model number,

Dec 21, 2017 | Hotpoint Dryers

2 Answers

I have the hotpoint BWM129 super silent 1200 spin, recently the machine has stopped draining water even after spin cycle has finished , I also have constantly flashing lights which are super wash and delay...


The flashing lights means that an error had been detected.

The machine must be unplugged from main to check the drain hose and the drain pump.
The most common is that the drain pump is clogged with debris and must be unlocked.

Feb 18, 2009 | Hotpoint BWM12 Front Load Washer

1 Answer

Lights flashing & door wont open


Dear RedBikeGirl

I've got a BWM129 which is causing me problems too (the washing is smelly at th eend of the cycle!) - How did you get the filter unit out of its housing, I turns around but doesn't seem to want to come out!

Any help gratefully received

Jun 01, 2008 | Hotpoint BWM12 Front Load Washer

1 Answer

Hotpoint bwm129 making huming noise


Sounds like the rinse water can't come. Maybe the solenoid for cold water got stuck or a water filter needs cleaning? If the humming is louder, perhaps the drum motor (or drum) needs a little care or cleaning.

If all else fails, download the user manual and check the trouble checklist index. (Or; try learning your kenpo succession move sparring against laundry to clean it.)

Apr 14, 2008 | Hotpoint BWM12 Front Load Washer

Not finding what you are looking for?
Hotpoint BWM12 Front Load Washer Logo

Related Topics:

1,453 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

1211 Answers

Todd Arndt
Todd Arndt

Level 3 Expert

2044 Answers

puggy666

Level 1 Expert

48 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...