Question about Toshiba 57HX81 57" Rear Projection Television

1 Answer

Red Led Flashing

My tv screen sudden went black and powe led start blinking. Is there easy fix for this problem? Plase help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers
Re: Red Led Flashing

If you haven't already found a solution to this problem, it is more than likely a failed fuse. If you are comfortable with the high-voltage electronics in your TV and are handy with a soldering iron, you can attempt to locate and repair the fuse(s) yourself. However, the fuse is more than likely failing because of an additional problem. It all depends on which fuse failed. Can you get back to me?

Posted on Jan 13, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hello. My Panasonic PT-50LC13 is not turn on. First flashing green light for one minute on the power button then starts to blink red and at the same time it starts blinking red LED lights every five...

Check ur tv fan,if ur cooling fan are runnig,before all these LED lights are flashing.If not that ur tv problems.All these LED lights are flashing the tv making alots of clinking noises too like it trying turn itself on?Yes,than the tv board that called the Ballast board it is dead too,must be replace also.This tv Ballast board only job are to help to ignite the tv projection lamp only and keeping it on and running.

Aug 29, 2011 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

The tv went blank @ the red led is flashing continuosly sony kds-60a2020

If its lamp light on tv front that is blinking red then lamp is dead/ broken and need to be replaced. Lamp replacement procedure is easy and written in user mnaual of tv.
If it is standby/ power light that is blinking then please count how many times it is blinking after three seconds pause and let me know to diagnose tv problem because it is an error code that has info in its blinking.

Apr 03, 2011 | Sony KDS-60A2020 60" HDTV

1 Answer

TV was working fine when we went to bed Monday (August 30) night. Got up the next morning and turned it on. It appeared it was going to come on, the green light flashed and then the lamp indicator light...

1. Red status LED, self-diagnosis error 44, check for open F9A06 on the Power PCB part # 283P128050 on the Power PCB 2. Red lamp LED, self diagnosis error 34. Check for 5-volts DC at J-9 connector pin 1 and 2 on the Engine Driver PCB if missing replace the Power PCB part # 930B921002 3. LED stops blinking after 70 seconds of plug in but will not power on. This model is equipped with a keyboard lock feature, this can be mistaken as a no power condition. To unlock the keyboard press and hold the "menu" button on the front panel for 10 seconds 4. LED stops blinking after 70 seconds of plug in but will not power on. Check for 3.2 volts DC at connector LE pin 3 and 4 on the Control PCB, if low suspect problems with the switches/buttons on the Control PCB part # 935D776001 5. LED stops blinking after 70 seconds of plug in but will not power on. Keyboard is not locked and key inputs at connector LE pin 3 and 4 check good. Suspect the E2P PCB part # 934C121001 6. (LED does not stop blinking after plug in) Disconnect the USB connector from the card reader to the front from the Chassis, if the LED stops blinking after 70 seconds replace the Card Reader part # 299P271010. 7. (LED does not stop blinking after plug in) Disconnecting the USB connector from the Card Reader did not help. Remove connector FC from the FMT PCB and plug the unit in, if the LED stops blinking after 70 seconds with FC removed suspect a problem on the FMT PCB (part # 930B924002), if the LED keeps blinking with connector FC removed suspect a problem on the DM PCB (part # 934C116002). 8. (LED does not stop blinking after plug in) On the DM PCB (part # 934C116002) check C81A2, C81A3, C81B3 and C81B4 (1000 UFD, 16V, 105C), if any are bad, replace all of them with part # 181P734030 (680 uFD, 16V, 105C). See Service Tip VS-78A 9. (LED does not stop blinking after plug in) On the FMT PCB (part # 930B924002) check C8F19, C8F21, C8F22, and C8F27 (16V 1000 UFD 105C), if any are bad, replace all of them with part # 181P734030 (680 uFD, 16V, 105C) See Service Tip VS-78A

Sep 08, 2010 | Mitsubishi WD-52725 52". Rear Projection...

1 Answer

The screen went black. Last time I changed the bulb and it started working. This time the TV did not come back. The screen is black. The center Green light and the bottom red light blink. Samsung 567W

Make sure properly connected and tightly sure cover put on and screws in,if change projection bulb,still blinking "LAMP" LED indication light.But,if "LAMP"LED indication flashes and making clicking noise.Ur Ballast board also dead.Require replacement,this Ballast board help to ignite the projection bulb.

Jul 30, 2010 | Samsung HLN567W 56" Rear Projection HDTV

1 Answer

Screen went black you could still hear the tv, timer/standby light is blinking. Is there a projection bulb that goes out. Can this be an easy fix?

U have a LED light indicator said lamp on ur tv?It is blinking?If the LED indicator said lamp is blinking.Than yes,ur projection bulb require changing.Yes replacing bulb pretty easy.

May 01, 2010 | Sony KP-53S70 53" Rear Projection...

2 Answers

What are the error codes for a Panasonic PT-47WX 42 TV

3 times LED blinks in Panasonic PT-47WX42 shows problem with convergence out chips failure as this tv has two big black ICs STK392-110 as convergence output, replace them to fix tv problem.
Click Part Store to see an image of required chip and price info.
Local tv tech is recommended if you have no experience of working in tv circuit boards.

Apr 18, 2010 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

Panasonic projuction screen tv.

3 blinks is the error code for the convergence ICs. You need to replace both STK392-110 convergence ICs. You can get replacement ICs at the following link and they provide installation instructions with pictures.

Oct 12, 2008 | Panasonic PT-47WX42 47" Rear Projection...

1 Answer

Picture is all red and led blinks 5 times

Most likley bad tube have replaced alot of them on this make and model.

Sep 02, 2008 | Sony KP-51WS510 51" Rear Projection...

2 Answers

Blinking led light on Toshiba

wow i must be another one with this toshiba common problem bug. Has anyone even remotely helped on this site?

Feb 27, 2008 | Toshiba TP50F50/51 50" Rear Projection...

1 Answer

Picture went off then Red light blinks all the time

Not an easy fix....requires chassis pull, careful soldering and
replacement of parts and fuses.....would you like step-by-step?

Jan 12, 2008 | Toshiba 65HX81 65" Rear Projection...

Not finding what you are looking for?
Toshiba 57HX81 57" Rear Projection Television Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

66352 Answers

Are you a Toshiba Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides